Mytee S-300H Tempo Heated Spotter Parts Diagrams

Find genuine Mytee S-300H parts for the S-300H Tempo Heated upholstery spotter. Pick the area of the machine below, click your part on Mytee’s factory drawing, and order it. Can’t find your part? Call us at 763-535-0770.

S-300H or S-300?

The S-300H is the heated Tempo, with a 600-watt in-line heater; the unheated S-300 has its own parts book and its own S-300 parts diagrams. Most parts are shared between the two, and each product page lists every model it fits. The model label on the machine tells you which you have.

S-300H Tempo Heated Parts Diagrams

Mytee S-300H Tempo Heated spotter body, tanks, heater and pump parts diagram

Body, Tanks, Heater & Pump

Handle, latch, tanks, filters, vacuum motor, 600 W heater, pump, fittings, switches, base and casters.

Mytee S-300H Tempo Heated spotter hose and upholstery tool parts diagram

Hose & Upholstery Tool

8-foot vacuum hose, solution hose, quick disconnect, cuffs, Heatguard wrap and the Air Lite tool.

Two parts that are not on these drawings also fit the S-300H: the E395 wiring harness and the A318 vacuum motor kit for 2017 and newer machines. The complete A905A heater assembly is also sold as one part.

S-300H Tempo Heated Accessories

Mytee supplies the S-300H with the 4-inch Air Lite upholstery tool and an 8-foot vacuum and solution hose set.

About Mytee S-300H Parts

The S-300H puts the Tempo’s 1-gallon solution and recovery tanks, 97 CFM vacuum with 85 inches of water lift and 55 PSI solenoid pump together with a 600-watt in-line heater. It runs from one 25-foot 16/3 cord, draws 12 amps, and weighs 28 pounds net.

Most S-300H repairs start in the same places as the S-300: lid and cap seals, the foam and screen filters, hose cuffs, and the quick disconnects. The heater adds its own parts. If the solution stays cold, check the heater switch, then the E574 manual-reset thermostat, the E573 automatic thermostat and the E571 heating rod. With only a 1-gallon recovery tank, empty it often so it never overfills.

Shop the Mytee S-300H Tempo Heated machine, browse the full Mytee lineup, see parts for every Mytee machine, or read Mytee’s own S-300H Tempo page. Twin City Vacuum has been selling and servicing cleaning equipment since 1956.

Frequently Asked Questions

What is the difference between the S-300H and S-300?

The S-300H adds a 600-watt in-line heater and draws 12 amps. Each has its own Mytee parts book, and most parts are shared between them.

What are the most common S-300H replacement parts?

The G217 foam and G216 screen filters, the clear lid and cap, the hose and cuffs, the quick disconnects, the C378 pump, and on the heater the E571 rod and the E573 and E574 thermostats.

Can I replace one heater part instead of the whole heater?

Yes. The heating rod, both thermostats and the casting are sold separately, and the complete A905A heater assembly is sold as one part.

What if my part says Call on the parts list?

Mytee does not sell every fastener, fitting and length of hose on its website. Call us at 763-535-0770 with the part number and we will order it for you.

How do I order S-300H parts or get help?

Open the area of the machine from the cards above, click your part on the diagram or in the table, and add it to your cart. Our staff at 5415 West Broadway, Crystal, MN 55428 can confirm the part first: call 763-535-0770.

Looking for a specific part? Use the diagrams above to browse the complete parts list, or call 763-535-0770 and we will find it for you.