Find genuine Mytee S-300H Tempo Heated body, tank, heater and pump parts. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
13. Vacuum Motor Gasket – G00414. 2-Stage Peripheral Vacuum Motor – C31613. Vacuum Motor Gasket – G00411. Tempo Spotter Vacuum Tank – P6105. Vacuum Tank Deflector – G0584. 3.5 in Clear Vacuum Tank Lid – G0303. Screw #8 x 5/8 in Phillips Oval, Stainless – H30422. Cord Strain Relief Fitting – H22023. 25 ft 16/3 Lighted Power Cord – E53324. 2-Position Rocker Switch – E53625. Plastite Screw #10 x 1/2 in, Stainless – H02926. 3-Hole Switch Plate – H31017. 10-32 Kep Nut – H27318. Quick Disconnect Mounting Plate – H48419. Screw 10-32 x 3/4 in Phillips Pan Head, Stainless – H25627. 1/4 in Female Quick Disconnect, FPT – B10228. 1/4 in Brass Hex Nipple – B10730. Tempo Spotter Base – P61242. 55 PSI Solenoid Pump – C37850. 1/4 in 90 Degree Brass Street Elbow – B10349. 1/4 in Swivel Barb Adapter with Gasket – B11045. 9/16 in ID Flat Washer – H21244. 1/4 in Filter Adapter – B11243. 1/4 in Filter Strainer – B11940. 14.5 in Solution Hose – AH18416. 2 in Swivel Stem Caster – H63846. Tempo Spotter Solution Tank – P61152. 10-32 x 1/2 in Pan Head Screw – H23012. 2.5 in Tethered Cap – G03638. 310 Degree Manual Thermostat – E57436. #6 x 3/16 in Self-Tapping Screw – H27437. 200 Degree Auto Thermostat – E57335. 600 W Heating Rod – E57134. 1/4 in Brass Coupling – B14233. 1/4 in MPT Brass Check Valve – B1161. Bolt 1/4-20 x 1/2 in Serrated Hex Flange – H7702. Tempo Spotter Handle – H6111. Bolt 1/4-20 x 1/2 in Serrated Hex Flange – H77010. 1.33 in Screen Mesh Filter – G21615. Lock Nut 3/8-16 Flange, Nylon Insert, Stainless – H2068. Tempo Spotter Latch – H4516. Screw 8-32 x 3/8 in Socket Head, Black – H24632. 1/4 in x 1/8 in Brass Adapter – B64631. 1/8 in 90 Degree Street Elbow – B14320. Electrical Lock Nut 1/2 in, Steel – H2219. 1.33 in Foam Filter – G21729. 1/4 in 45 Degree Brass Street Elbow – B1307. Flat Washer #10, Stainless – H28921. Screw 10-32 x 1/2 in Socket Head – H3897. Flat Washer #10, Stainless – H28917. 10-32 Kep Nut – H27348. Ferrule .50 in ID x 1 in – B17447. Solution Hose 1/4 in Silicone Braided, Clear – PH634-1253. Connecting Plate – H31251. Barb 1/4 in x 1/8 in MPT – B12851. Barb 1/4 in x 1/8 in MPT – B12829. 1/4 in 45 Degree Brass Street Elbow – B13019. Screw 10-32 x 3/4 in Phillips Pan Head, Stainless – H2567. Flat Washer #10, Stainless – H28917. 10-32 Kep Nut – H27341. 55 PSI Pump Bracket Set – H25034. 1/4 in Brass Coupling – B14239. Heater Casting – H903A45. 9/16 in ID Flat Washer – H212This drawing covers the main body of the Mytee S-300H Tempo Heated spotter.
Mytee S-300H heater parts and body parts on this drawing
At the top are the handle and latch, the clear recovery lid and cap, and the G217 foam and G216 screen filters. Below them sit the recovery and solution tanks and the C316 vacuum motor.
In addition, the S-300H carries a 600-watt in-line heater, items 35 to 39: the E571 heating rod, the E573 automatic and E574 manual-reset thermostats, and the H903A casting. Mytee also sells the whole A905A heater assembly as one part. For example, if the solution never warms up, check the heater switch first, then the thermostats and the rod.
However, parts marked Call are fasteners, a ferrule, a barb and braided hose that Mytee does not sell on its website, so call us and we will order them.
Mytee S-300H Body, Tanks, Heater & Pump Parts List
Frequently Asked Questions
Which heater parts does the S-300H use?
The S-300H uses one E571 600-watt heating rod in an H903A casting, with an E573 automatic thermostat and an E574 manual-reset thermostat. The complete A905A heater assembly is also sold as one part.
My S-300H sprays but the solution stays cold. What should I check?
Make sure the heater switch is on and the machine has had a few minutes to warm up. Then check whether the manual-reset thermostat has tripped, and test the heating rod and the automatic thermostat.
Which filters and motor does the S-300H use?
The G217 foam filter, the G216 screen filter and the C316 vacuum motor, the same as the unheated S-300.
Why do some parts say Call?
Mytee does not sell every fastener, fitting and length of hose on its website. Call 763-535-0770 with the item number from this drawing and we will order it.
Need the hose or the upholstery tool? See the S-300H hose and tool parts, or go back to all Mytee S-300H Tempo Heated parts diagrams. You can also see the machine on mytee.com.









































