Mytee Vacuum Motor Gasket G004

$14.09

Mytee Vacuum Motor Gasket (part# G004), no adhesive, that seals the vacuum motor; two per Mytee Lite 8070. Fits HP90, HP120, Tempo, Contractor’s Special, Speedster and LTD3 models (see full list).

The Mytee Vacuum Motor Gasket G004 is the round rubber gasket that seals a vacuum motor in place on many Mytee spotters and extractors. Mytee notes that it has no adhesive. On the Mytee Lite 8070 two are used, one above and one below the 3-stage vacuum motor.

Compatible Models for the Mytee Vacuum Motor Gasket G004

G004 is listed in the current Mytee parts drawing for every model above.

What the vacuum motor gasket Does

A vacuum motor has to seal against the tank on its intake side, or it pulls air around the motor instead of through the hose. The gasket makes that seal and also cushions the motor. On the Mytee Lite the motor sits between two G004 gaskets, so both sides seal when the recovery tank is fastened down.

Signs It Needs Replacing

Replace the gaskets when they are compressed flat, cracked, torn or hardened, or whenever the vacuum motor is removed. A failing motor gasket gives weak suction, more motor noise, and sometimes water marks around the motor.

Specifications

  • Part number: G004
  • Description: gasket, vacuum motor (Mytee parts drawing)
  • Adhesive: none (Mytee)
  • Quantity on the Mytee Lite 8070: 2

Order two for a Mytee Lite. Because the gasket has no adhesive, center it carefully before you lower the recovery tank. Browse every numbered part on the Mytee Lite 8070 parts diagrams, or see Mytee’s own listing for part G004 on mytee.com.

Find this part on the Mytee Lite 8070 parts diagrams, Mytee HP90 Stingray parts diagrams, Mytee HP120 Grand Prix parts diagrams, Mytee 80-120 Prep Center S parts diagrams, Mytee S-300 Tempo parts diagrams, Mytee S-300H Tempo Heated parts diagrams, Mytee 2002CS Contractor’s Special parts diagrams, Mytee 1000DX-200 and 2005CS parts diagrams, Mytee 1001DX-200 and 2008CS parts diagrams, Mytee 1003DX Speedster parts diagrams, and Mytee LTD3 Speedster parts diagrams, where you can click it on Mytee’s factory drawing.

Frequently Asked Questions

What does the vacuum motor gasket do on the Mytee Lite 8070?

It seals and cushions the 3-stage vacuum motor; two are used, above and below the motor.

How do I know if my G004 gasket needs replacing?

It is flattened, cracked, torn or hard, or suction is weak and the motor is louder than normal.

What models is the Vacuum Motor Gasket (part# G004) compatible with?

It is in the parts drawing for the Mytee Lite 8070, HP90, HP120, 80-120, S-300, S-300H, 2002CS, 2008CS, 1000DX-200 (and 2005CS), 1001DX-200, 1003DX and LTD3.

How do I order the Vacuum Motor Gasket (part# G004) or get help?

You can add the Vacuum Motor Gasket (part# G004) to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Mytee equipment and can help confirm the right part for your machine.

Questions about the vacuum motor gasket (part# G004)? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Mytee Vacuum Motor Gasket G004”

Your email address will not be published. Required fields are marked *