Mytee 1001DX-200 Speedster Heated & 2008CS Contractor’s Special Parts Diagrams

Find genuine Mytee 1001DX-200 parts and 2008CS parts for the 1001DX-200 Speedster Deluxe Heated and the 2008CS Contractor’s Special. Pick your machine’s drawings below, click your part, and order it. Can’t find your part? Call us at 763-535-0770.

1001DX-200 or 2008CS?

They are the same heated extractor: the 2008CS Contractor’s Special is the 1001DX-200 sold as a package with a hose set, wand and upholstery tool. Their parts books number the callouts differently, though, so each machine has its own drawings below. Use the set that matches the model on your machine’s label.

Mytee 1001DX-200 Parts Diagrams

Mytee 2008CS Parts Diagrams

2008CS Package Items

The 2008CS parts book lists these items supplied with the package. Each is sold on its own and also fits the 1001DX-200.

Mytee 8300-EZ Dual Jet Wand 8300-EZ for Mytee 2002CS Contractor’s Special part number 8300-EZ

12 in Dual Jet EZ Glider Wand 8300-EZ

2008CS package · $398.00

Mytee Air Lite Upholstery Tool 8400P part number 8400P

4 in Air Lite Upholstery Tool 8400P

2008CS package · $152.00

Some items in both parts books are not drawn: the E999 wiring harness, the E351A 50-foot twist-lock cords (two per machine), the G008 Piglet filters and P590 quick-disconnect cuties.

About Mytee 1001DX-200 and 2008CS Parts

The 1001DX-200 pairs 10-gallon solution and recovery tanks with two 3-stage vacuum motors rated together at 200 CFM and 130 inches of water lift, a 220 PSI diaphragm pump and a 2,000-watt in-line heater. It runs from two detachable 50-foot 12/3 twist-lock cords on separate circuits; the blue light tells you the circuits are separate.

Those parts tell you where most repairs start. Weak suction is usually the vacuum lid gasket, the drain valve, a filter or a hose cuff. Weak spray starts at the solution strainer, the quick disconnects and the C322D pump. A cold heater points to the thermostats and rods on the A902 heater.

Shop the Mytee 1001DX-200 Speedster Deluxe Heated or the Mytee 2008CS Contractor’s Special, browse the full Mytee lineup, see parts for every Mytee machine, or read Mytee’s own 1001DX-200 page. Twin City Vacuum has been selling and servicing cleaning equipment since 1956.

Frequently Asked Questions

Do the 1001DX-200 and 2008CS use the same parts?

Mostly. The 2008CS is the 1001DX-200 sold as a package, and 94% of the part numbers in their books are the same. Each product page lists every model it fits.

Why are there two sets of drawings?

The 2008CS parts book numbers its callouts differently, so each machine has its own drawings and tables. The A902 heater drawing is identical in both books and is shared.

What comes with the 2008CS package?

The 8100 25-foot hose set, the 8300-EZ dual jet wand and the 8400P Air Lite upholstery tool, plus a gallon of descaler on our listing.

What if my part says Call on the parts list?

Mytee does not sell every fastener, fitting and length of hose on its website. Call us at 763-535-0770 with the part number and we will order it for you.

How do I order 1001DX-200 or 2008CS parts?

Open your machine’s drawings above, click your part, and add it to your cart. Our staff at 5415 West Broadway, Crystal, MN 55428 can confirm the part first: call 763-535-0770.

Looking for a specific part? Use the diagrams above to browse the complete parts list, or call 763-535-0770 and we will find it for you.