Mytee 1001DX-200 Speedster Deluxe Heated 220 PSI Carpet Extractor

$2,779.00

The Mytee 1001DX-200 Speedster Deluxe Heated is a 10-gallon carpet extractor with a 2,000-watt heater (to 210°F), a 220 PSI pump and two vacuum motors (200 CFM, 130″ lift). Runs on two 50-foot twist-lock cords; 110 lb with built-in loading wheels.

SKU: 1001DX-200 Category: Tag: Brand:

The Mytee 1001DX-200 Speedster® Deluxe Heated is a 10-gallon portable carpet extractor that adds hot-water cleaning to the Speedster’s 220 PSI pump and twin vacuum motors. Its 2,000-watt in-line heater, the largest on any Mytee portable, brings solution up to 210°F to cut through heavy grease and stubborn grime in restaurants, dining halls, salt-caked entryways and other hard-working hospitality areas.

Mytee 1001DX-200 Heat, Pressure and Recovery

The diaphragm pump delivers 1.35 GPM at 220 PSI through the heater to the wand. Two 3-stage vacuum motors produce 200 CFM and 130 inches of water lift for strong recovery and quicker drying, and a vacuum shut-off switch protects them when the recovery tank fills. Because the heater adds load, the machine uses two 50-foot twist-lock 12/3 cords, drawing 20 amps and 18 amps; run them from separate circuits.

Speedster Design

The roto-molded polyethylene housing resists rust and dents. Waist-high switches cut down on bending, bucket-height drains make emptying simple, and the see-through lid shows the recovery tank level at a glance. Ten-inch non-marking rear wheels and four-inch locking casters handle job sites and stairs, and built-in loading wheels let it roll into a van without a ramp.

The 1001DX-200 ships as a bare machine with its cords, ready for the hose and tools you already use. The Mytee 2008CS Contractor’s Special is the same machine supplied with a 25-foot hose set, 12-inch wand, Air Lite™ upholstery tool and descaler. For the unheated, single-cord version, see the Mytee 1000DX-200.

What’s Included with the Mytee 1001DX-200

  • 10-gallon dual-vacuum heated carpet extractor, 220 PSI, 2,000 W
  • Two detachable 50′ 12/3 twist-lock power cords

Mytee 1001DX-200 Specifications

Model1001DX-200
Solution tank10 gallon (37.9 L)
Recovery tank10 gallon (37.9 L)
Vacuum motorsTwo 3-stage motors, 200 CFM, 130″ water lift
Vacuum shut-off switchYes
PumpDiaphragm, 220 PSI, 1.35 GPM
Heater2,000-watt in-line, max 210°F
Power cordsTwo 50′ (15.2 m) twist-lock 12/3 cords
Amp drawCord one 20 amps, cord two 18 amps (115V, 60Hz)
Wheels10″ foam-filled rear wheels, 4″ locking front casters
Net weight110 lb (51.7 kg)
Dimensions28″ × 18.5″ × 39″
Shipping weight125 lb (56.7 kg), not including pallet
Shipping dimensions30″ × 20″ × 47″

Mytee 1001DX-200 Parts and Service

Every replacement part for the 1001DX-200 is on our Mytee 1001DX-200 and 2008CS parts hub, with Mytee’s factory drawings for your machine: the base, pump and heater plumbing, the solution tank, handle and plumbing, the vacuum tank, motors and switches, and the A902 heater. Click a part on the drawing to order it, or call 763-535-0770 and our service department in Crystal will find it for you.

Recommended Accessories & Add-Ons

Mytee Cuties QD Covers P590 for Mytee Lite 8070 part number P590

Cuties QD Safety Covers, Pack of 2 P590
Cuties covers for the hot brass quick disconnects, pack of 2. $5.00
Mytee 25 ft Hose Set 8100 for Mytee 1000DX-200 / 2005CS part number 8100

25 ft Vacuum and Solution Hose Set 8100
25-foot 1.5-inch vacuum and solution hose set. $260.00
Mytee 8300-EZ Dual Jet Wand 8300-EZ for Mytee 2002CS Contractor’s Special part number 8300-EZ

12 in Dual Jet EZ Glider Wand 8300-EZ
12-inch stainless dual jet S-bend carpet wand. $398.00
Mytee Air Lite Upholstery Tool 8400P part number 8400P

4 in Air Lite Upholstery Tool 8400P
4-inch Air Lite upholstery tool. $152.00
Mytee 50 ft Twist-Lock Power Cord E351A for Mytee 1000DX-200 / 2005CS part number E351A

50 ft 12/3 Twist-Lock Power Cord E351A
50-foot 12/3 detachable twist-lock power cord. $123.76
Mytee Piglet Filters G008 for Mytee 1000DX-200 / 2005CS part number G008

Piglet Filters, Pack of 25 G008
Disposable Piglet debris filters, pack of 25. $16.00

Manuals and Documents

Mytee publishes the Speedster user manual, the 1001DX-200 parts list, the 1001DX-200 wiring diagram and the Speedster brochure. Full manufacturer documentation is on the 1001DX-200 page at mytee.com.

Buy the Mytee 1001DX-200 from Twin City Vacuum

Browse the full Mytee equipment line or our other carpet extractors.

Compare Mytee Speedster Extractors

ModelMytee 1000DX-200 Speedster Deluxe 220 PSI Carpet ExtractorMytee 1001DX-200 Speedster Deluxe Heated 220 PSI Carpet Extractor
You are viewing this model
Mytee 1005LX Speedster 500 PSI LX Vacuum Carpet ExtractorMytee 1003DX Speedster Deluxe Heated 500 PSI Carpet ExtractorMytee LTD3 Speedster LTD Heated Carpet Extractor with Auto-Fill and Pump-OutMytee LTD5-LX Speedster LTD 500 PSI Carpet Extractor with LX VacuumsMytee LTD12-LX Speedster LTD 1000 PSI Tile, Grout and Carpet Extractor
Pump (PSI / type)220 / diaphragm220 / diaphragm500 / piston500 / piston500 / piston500 / piston1,000 / piston
Heater (W)None2,000None1,6001,600NoneNone
Solution tank (gal)10101010111111
Recovery tank (gal)10101010111111
Vacuum (motors, CFM / in. lift)2 × 3-stage, 200 CFM / 130 in.2 × 3-stage, 200 CFM / 130 in.2 × LX, 250 CFM / 182 in.2 × 3-stage, 200 CFM / 130 in.2 × 3-stage, 200 CFM / 130 in.2 × LX, 250 CFM / 182 in.2 × LX, 250 CFM / 145 in.
Power cords1 × 50 ft twist-lock2 × 50 ft twist-lock2 × 50 ft twist-lock2 × 50 ft twist-lock2 × 50 ft twist-lock2 × 50 ft twist-lock2 × 50 ft twist-lock
Auto-fill / pump-outNoNoNoNoAuto-fill, chem. injection, 3.3 GPM pump-outAuto-fill, chem. metering, 3.3 GPM pump-outAuto-fill, chem. injection, 3.3 GPM pump-out
Net weight (lb)104110130135165135154
Included toolsNone (machine only)None (machine only)None (machine only)None (machine only)Recovery tank rinse hoseRecovery tank rinse hoseRecovery tank rinse hose, Loading Buddy wheels
Price$2,421.00$2,779.00$3,667.00$3,761.00$4,374.00$4,738.00$5,377.00
ViewViewViewViewViewViewView

Frequently Asked Questions

How hot does the Mytee 1001DX-200 get?

Its 2,000-watt in-line heating system reaches a maximum of 210°F.

Does the 1001DX-200 need two outlets?

Yes. It runs on two 50-foot twist-lock 12/3 cords; Mytee lists the draw at 20 amps on cord one and 18 amps on cord two at 115V. Plug them into separate circuits.

What is the difference between the 1001DX-200 and the 1000DX-200?

They share the same 10-gallon, 220 PSI, dual-vacuum Speedster body. The 1001DX-200 adds the 2,000-watt heater and a second power cord; the 1000DX-200 is unheated and runs on one cord.

Does the 1001DX-200 come with a hose and wand?

No. The machine ships with its power cords. The Mytee 2008CS Contractor’s Special is the same machine supplied with a 25-foot hose set, a 12-inch wand, an upholstery tool and descaler.

How much does the 1001DX-200 weigh?

Mytee lists a net weight of 110 lb (51.7 kg). Built-in loading wheels let one person get it into a work vehicle without a ramp.

How do I order the 1001DX-200 or get help?

Add it to your cart on this page, or call Twin City Vacuum at 763-535-0770. Our store is at 5415 West Broadway, Crystal, MN 55428.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Mytee 1001DX-200 Speedster Deluxe Heated 220 PSI Carpet Extractor”

Your email address will not be published. Required fields are marked *