Mytee LTD3 Speedster LTD Heated Carpet Extractor with Auto-Fill and Pump-Out
$4,374.00
The Mytee LTD3 Speedster LTD is an 11-gallon heated carpet extractor with auto-fill, chemical injection and 3.3 GPM pump-out, a 1,600-watt heater to 210°F, a 500 PSI adjustable piston pump and two vacuum motors (200 CFM, 130″ lift).
The Mytee LTD3 Speedster® LTD is a heated portable carpet extractor with the automation that saves trips to the sink: auto-fill, chemical injection and automatic pump-out. It pairs 11-gallon tanks with a 500 PSI adjustable piston pump, a 1,600-watt heater and two vacuum motors, for contractors who want results job after job without hauling buckets.
Mytee LTD3 Automation
Auto-fill keeps the solution tank topped up from a water source, chemical injection meters detergent into the line, and the automatic pump-out empties the recovery tank at 3.3 GPM to a drain while you keep cleaning. An industry-first recovery tank rinse hose makes the end-of-day clean-out quicker.
Heat, Pressure and Recovery
The 1,600-watt heater delivers solution at up to 210°F to break apart soil and set-in stains. The adjustable piston pump supplies 1.5 GPM at up to 500 PSI, and two 3-stage vacuum motors produce 200 CFM and 130 inches of water lift, with a vacuum shut-off switch to protect them. Use neutral or mildly alkaline chemistry: Mytee warns that acid rinses and highly alkaline products such as sodium hydroxide damage the pump and void the warranty.
The roto-molded polyethylene housing resists rust and dents, the switch plate and regulator sit at waist height, and ten-inch foam-filled wheels with four-inch locking casters keep transport safe. The machine runs on two 50-foot twist-lock 12/3 cords drawing 20 amps each. For the same heat and pressure without the automation, see the Mytee 1003DX.
What’s Included with the Mytee LTD3
- 11-gallon heated carpet extractor with auto-fill, chemical injection and pump-out
- Recovery tank rinse hose
- Two 50′ 12/3 twist-lock power cords
Mytee LTD3 Specifications
| Model | LTD3 |
|---|---|
| Solution tank | 11 gallon (41.6 L) |
| Recovery tank | 11 gallon (41.6 L) |
| Vacuum motors | Two 3-stage motors, 200 CFM, 130″ water lift |
| Vacuum shut-off switch | Yes |
| Pump | Adjustable piston, 500 PSI, 1.5 GPM |
| Heater | 1,600-watt, max 210°F |
| Automation | Auto-fill, chemical injection, pump-out |
| Pump-out flow | 3.3 GPM |
| Power cords | Two 50′ (15.2 m) twist-lock 12/3 cords |
| Amp draw | Cord one 20 amps, cord two 20 amps (110–120V, 60Hz) |
| Wheels | 10″ foam-filled wheels, 4″ locking casters |
| Net weight | 165 lb (74.8 kg) |
| Dimensions | 30″ × 20″ × 42″ |
| Shipping weight | 180 lb (81.6 kg), not including pallet |
| Shipping dimensions | 37¼″ × 21½″ × 50¾″ |
Mytee LTD3 Parts and Service
Every replacement part for the LTD3 is on our Mytee LTD3 Speedster parts hub. Mytee’s factory drawings are split into three clickable diagrams: the base, pump and pump-out, the solution tank, heater and chemical injection, and the vacuum tank, motors and switches. Click a part on the drawing to order it, or call 763-535-0770 and our service department in Crystal will find it for you.
Recommended Accessories & Add-Ons

Cuties covers for the hot brass quick disconnects, pack of 2. $5.00

3/4 in garden hose x 1/4 in swivel adapter. $24.09

Piglet filters, pack of 25. $16.00

Mesh filter bag. $7.84
Manuals and Documents
Mytee publishes the Speedster LTD user manual, the LTD3 parts list, the LTD3 wiring diagram and the Speedster brochure. Full manufacturer documentation is on the LTD3 page at mytee.com.
Buy the Mytee LTD3 from Twin City Vacuum
Browse the full Mytee equipment line or our other carpet extractors.
Compare Mytee Speedster Extractors
| Model | Mytee 1000DX-200 Speedster Deluxe 220 PSI Carpet Extractor | Mytee 1001DX-200 Speedster Deluxe Heated 220 PSI Carpet Extractor | Mytee 1005LX Speedster 500 PSI LX Vacuum Carpet Extractor | Mytee 1003DX Speedster Deluxe Heated 500 PSI Carpet Extractor | Mytee LTD3 Speedster LTD Heated Carpet Extractor with Auto-Fill and Pump-Out You are viewing this model | Mytee LTD5-LX Speedster LTD 500 PSI Carpet Extractor with LX Vacuums | Mytee LTD12-LX Speedster LTD 1000 PSI Tile, Grout and Carpet Extractor |
|---|---|---|---|---|---|---|---|
| Pump (PSI / type) | 220 / diaphragm | 220 / diaphragm | 500 / piston | 500 / piston | 500 / piston | 500 / piston | 1,000 / piston |
| Heater (W) | None | 2,000 | None | 1,600 | 1,600 | None | None |
| Solution tank (gal) | 10 | 10 | 10 | 10 | 11 | 11 | 11 |
| Recovery tank (gal) | 10 | 10 | 10 | 10 | 11 | 11 | 11 |
| Vacuum (motors, CFM / in. lift) | 2 × 3-stage, 200 CFM / 130 in. | 2 × 3-stage, 200 CFM / 130 in. | 2 × LX, 250 CFM / 182 in. | 2 × 3-stage, 200 CFM / 130 in. | 2 × 3-stage, 200 CFM / 130 in. | 2 × LX, 250 CFM / 182 in. | 2 × LX, 250 CFM / 145 in. |
| Power cords | 1 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock |
| Auto-fill / pump-out | No | No | No | No | Auto-fill, chem. injection, 3.3 GPM pump-out | Auto-fill, chem. metering, 3.3 GPM pump-out | Auto-fill, chem. injection, 3.3 GPM pump-out |
| Net weight (lb) | 104 | 110 | 130 | 135 | 165 | 135 | 154 |
| Included tools | None (machine only) | None (machine only) | None (machine only) | None (machine only) | Recovery tank rinse hose | Recovery tank rinse hose | Recovery tank rinse hose, Loading Buddy wheels |
| Price | $2,421.00 | $2,779.00 | $3,667.00 | $3,761.00 | $4,374.00 | $4,738.00 | $5,377.00 |
| View | View | View | View | View | View | View |
Frequently Asked Questions
What automation does the Mytee LTD3 have?
The LTD3 has auto-fill, chemical injection and an automatic pump-out that empties the recovery tank at 3.3 GPM, so you are not stopping to fill and dump buckets.
How hot does the LTD3 get?
Its 1,600-watt heater delivers solution at up to 210°F to break apart soil and set-in stains.
What pump does the LTD3 use?
An adjustable 500 PSI piston pump delivering 1.5 GPM.
Can I use acid rinse in the LTD3?
No. Mytee warns that acidic solutions such as acid rinse and highly alkaline solutions such as sodium hydroxide will damage the pump and void the warranty.
Does the LTD3 need two outlets?
Yes. It runs on two 50-foot twist-lock 12/3 cords, each drawing 20 amps at 110–120V. Plug them into separate circuits.
How do I order the LTD3 or get help?
Add it to your cart on this page, or call Twin City Vacuum at 763-535-0770. Our store is at 5415 West Broadway, Crystal, MN 55428.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.











Reviews
There are no reviews yet