Mytee 1003DX Speedster Deluxe Heated 500 PSI Carpet Extractor
$3,761.00
The Mytee 1003DX Speedster Deluxe Heated is a 10-gallon carpet extractor with a 500 PSI piston pump (1.5 GPM), a 1,600-watt heater to 210°F and two vacuum motors (200 CFM, 130″ lift). Runs on two 50-foot twist-lock cords; 135 lb with built-in loading wheels.
The Mytee 1003DX Speedster® Deluxe Heated is an all-around portable carpet extractor for carpet and upholstery: 10-gallon tanks, an adjustable 500 PSI piston pump, a 1,600-watt in-line heater and two vacuum motors. It handles the thicker pile of residential carpet and gives strong hot-water results where a truckmount cannot reach.
Mytee 1003DX 500 PSI Piston Pump
The piston pump pushes 1.5 GPM at up to 500 PSI to drive solution into dense pile, and it can be turned down to clean upholstery. The 1,600-watt heater raises it to as much as 210°F. Two 3-stage vacuum motors deliver 200 CFM and 130 inches of water lift for recovery, with a vacuum shut-off switch to protect them when the tank is full. Use neutral or mildly alkaline chemistry: Mytee warns that acid rinses and highly alkaline products such as sodium hydroxide damage the pump and void the warranty.
Built on the Speedster Body
The 1003DX shares the Speedster’s roto-molded polyethylene housing, waist-high switches, bucket-height drains and see-through recovery lid. Ten-inch non-marking rear wheels and four-inch locking casters move it on site, and built-in loading wheels get it into a van without a ramp. At 135 lb it is the heaviest Speedster Deluxe, a result of the piston pump. It runs on two 50-foot twist-lock 12/3 cords drawing 20 and 18 amps.
If 220 PSI is enough for your work, the Mytee 1001DX-200 carries a larger 2,000-watt heater on a lighter machine.
What’s Included with the Mytee 1003DX
- 10-gallon dual-vacuum heated carpet extractor, 500 PSI, 1,600 W
- Two detachable 50′ 12/3 twist-lock power cords
Mytee 1003DX Specifications
| Model | 1003DX |
|---|---|
| Solution tank | 10 gallon (37.9 L) |
| Recovery tank | 10 gallon (37.9 L) |
| Vacuum motors | Two 3-stage motors, 200 CFM, 130″ water lift |
| Vacuum shut-off switch | Yes |
| Pump | Piston, 500 PSI, 1.5 GPM |
| Heater | 1,600-watt in-line, max 210°F |
| Power cords | Two 50′ (15.2 m) twist-lock 12/3 cords |
| Amp draw | Cord one 20 amps, cord two 18 amps (115V, 60Hz) |
| Wheels | 10″ foam-filled rear wheels, 4″ locking front casters |
| Net weight | 135 lb (61.2 kg) |
| Dimensions | 28″ × 18.5″ × 39″ |
| Shipping weight | 150 lb (68 kg), not including pallet |
| Shipping dimensions | 30″ × 20″ × 47″ |
Mytee 1003DX Parts and Service
Every replacement part for the 1003DX is on our Mytee 1003DX Speedster parts hub, with Mytee’s factory drawings split into four clickable diagrams: the base, pump, heater and regulator, the solution tank, handle and plumbing, the vacuum tank, motors and switches, and the A908 heater. Click a part on the drawing to order it, or call 763-535-0770 and our service department in Crystal will find it for you.
Recommended Accessories & Add-Ons

Mytee’s 4-inch clear-head Air Lite upholstery tool. $152.00

15-foot 1.25-inch vacuum and solution hose combo. $153.00

Cuties covers for the hot brass quick disconnects, pack of 2. $5.00
Manuals and Documents
Mytee publishes the Speedster user manual, the Speedster spec sheet, the 1003DX parts list and the 1003DX wiring diagram. Full manufacturer documentation is on the 1003DX page at mytee.com.
Buy the Mytee 1003DX from Twin City Vacuum
Browse the full Mytee equipment line or our other carpet extractors.
Compare Mytee Speedster Extractors
| Model | Mytee 1000DX-200 Speedster Deluxe 220 PSI Carpet Extractor | Mytee 1001DX-200 Speedster Deluxe Heated 220 PSI Carpet Extractor | Mytee 1005LX Speedster 500 PSI LX Vacuum Carpet Extractor | Mytee 1003DX Speedster Deluxe Heated 500 PSI Carpet Extractor You are viewing this model | Mytee LTD3 Speedster LTD Heated Carpet Extractor with Auto-Fill and Pump-Out | Mytee LTD5-LX Speedster LTD 500 PSI Carpet Extractor with LX Vacuums | Mytee LTD12-LX Speedster LTD 1000 PSI Tile, Grout and Carpet Extractor |
|---|---|---|---|---|---|---|---|
| Pump (PSI / type) | 220 / diaphragm | 220 / diaphragm | 500 / piston | 500 / piston | 500 / piston | 500 / piston | 1,000 / piston |
| Heater (W) | None | 2,000 | None | 1,600 | 1,600 | None | None |
| Solution tank (gal) | 10 | 10 | 10 | 10 | 11 | 11 | 11 |
| Recovery tank (gal) | 10 | 10 | 10 | 10 | 11 | 11 | 11 |
| Vacuum (motors, CFM / in. lift) | 2 × 3-stage, 200 CFM / 130 in. | 2 × 3-stage, 200 CFM / 130 in. | 2 × LX, 250 CFM / 182 in. | 2 × 3-stage, 200 CFM / 130 in. | 2 × 3-stage, 200 CFM / 130 in. | 2 × LX, 250 CFM / 182 in. | 2 × LX, 250 CFM / 145 in. |
| Power cords | 1 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock | 2 × 50 ft twist-lock |
| Auto-fill / pump-out | No | No | No | No | Auto-fill, chem. injection, 3.3 GPM pump-out | Auto-fill, chem. metering, 3.3 GPM pump-out | Auto-fill, chem. injection, 3.3 GPM pump-out |
| Net weight (lb) | 104 | 110 | 130 | 135 | 165 | 135 | 154 |
| Included tools | None (machine only) | None (machine only) | None (machine only) | None (machine only) | Recovery tank rinse hose | Recovery tank rinse hose | Recovery tank rinse hose, Loading Buddy wheels |
| Price | $2,421.00 | $2,779.00 | $3,667.00 | $3,761.00 | $4,374.00 | $4,738.00 | $5,377.00 |
| View | View | View | View | View | View | View |
Frequently Asked Questions
What pressure does the Mytee 1003DX run at?
Its adjustable piston pump delivers up to 500 PSI at 1.5 GPM, and can be turned down for upholstery.
How hot does the 1003DX get?
A 1,600-watt in-line heating system reaches a maximum of 210°F.
Can I use acid rinse in the 1003DX?
No. Mytee warns that acidic solutions such as acid rinse and highly alkaline solutions such as sodium hydroxide will damage the pump and void the warranty.
Does the 1003DX need two outlets?
Yes. It runs on two 50-foot twist-lock 12/3 cords, drawing 20 amps on cord one and 18 amps on cord two at 115V.
How does the 1003DX compare with the 1001DX-200?
Both are heated, dual-vacuum, 10-gallon Speedsters. The 1003DX trades the 1001DX-200’s 220 PSI diaphragm pump and 2,000-watt heater for a 500 PSI piston pump and a 1,600-watt heater, and weighs 135 lb against 110 lb.
How do I order the 1003DX or get help?
Add it to your cart on this page, or call Twin City Vacuum at 763-535-0770. Our store is at 5415 West Broadway, Crystal, MN 55428.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.











Reviews
There are no reviews yet