Find genuine Mytee 2008CS base, pump and heater plumbing parts. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
20. 1/4 in FPT 90 Degree Brass Elbow – B20718. 350 PSI Brass Relief Valve – B54221. 1/4 in MPT Brass Check Valve – B11619. 1/4 in Brass Tee – B11322. 14.5 in Solution Hose – AH18423. 10-32 Kep Nut – H27314. 10-32 x 1/2 in Pan Head Screw – H23024. Dual Heater Mounting Bracket – H52825. 2000 W Heater Assembly – A90217. 1/4 in Barb x 1/4 in MPT Brass Adapter – B10926. Ferrule 0.50 in ID – B174106. Solution Hose 1/4 in x 30 in – PH63427. 1/4 in 90 Degree Brass Street Elbow – B1031. Screw 10-32 x 3/4 in Phillips Flat Head, Black Stainless – H1865. Vacuum Shut-Off Relay – E632A6. Lock Nut 1/4-20, Nylon Insert, Stainless – H2167. 1/4 in Stainless Flat Washer – H2108. Bolt 1/4-20 x 1 in Hex Head, Stainless – H3429. 4 in Locking Swivel Caster – H66811. Rear Wheel Axle – H37110. Speedster Base – P74713. 12mm External C-Clip – H04212. 10 in Foam-Filled Wheel – H39229. 3/8 in MPT x 1/4 in MPT 90 Degree Elbow – B6527. 1/4 in Stainless Flat Washer – H21031. 220 PSI Diaphragm Pump – C322D33. 1/2 in Barb x 3/8 in MPT 90 Degree Brass Elbow – B172109. Solution Hose 1/2 in Polywire Reinforced – PH615K23. 10-32 Kep Nut – H27316. Connecting Plate – H31229. 3/8 in MPT x 1/4 in MPT 90 Degree Elbow – B65222. 14.5 in Solution Hose – AH18448. 48 in Solution Hose – AH206104. Bulkhead Washer 1 in – H30514. 10-32 x 1/2 in Pan Head Screw – H23015. 20 Amp Flanged Twist-Lock Inlet – E36034. 5/16 to 29/32 in Hose Clamp – H3472. Relay Switch Mounting Plate – H632109. Audible Circuit Light Controller – E5643. Lock Nut 8-32, Nylon Insert – H1464. Lock Nut 6-32, Nylon Insert – H79214. 10-32 x 1/2 in Pan Head Screw – H23032. Washer 11/16 in ID x 1-1/2 in OD, Stainless – H29926. Ferrule 0.50 in ID – B17430. 10-32 x 1-1/4 in Pan Head Screw – H22262. 9/16 in ID Flat Washer – H212This drawing covers the lower half of the Mytee 2008CS. The 1001DX-200 has its own drawings because its parts book numbers the callouts differently; many parts are shared, and each product page lists every model it fits.
Mytee 2008CS pump and heater plumbing parts
The base carries the 10-inch wheels on the H371 axle and the 4-inch casters. Inside it sit the C322D 220 PSI pump (item 31), the A902 2,000-watt heater (item 25), the relief valve, the power inlet and the brass fittings and hoses that join them.
For example, if the wand sprays weakly, start with the solution strainer and the quick disconnect, then the pump. If the solution stays cold, see the A902 heater drawing.
However, parts marked Call are fasteners, fittings and hose lengths that Mytee does not sell on its website, so call us and we will order them.
Mytee 2008CS Base, Pump & Heater Plumbing Parts List
Frequently Asked Questions
Which pump does the 2008CS use?
The C322D 220 PSI diaphragm pump, item 31 on this drawing.
Which heater is in the 2008CS?
The A902 2,000-watt heater, item 25. Its own parts are on the A902 heater drawing.
Why do some parts say Call?
Mytee does not sell every fastener, fitting and length of hose on its website. Call 763-535-0770 with the item number from this drawing and we will order it.
How do I order 2008CS pump parts?
Click the part on the drawing or in the table and add it to your cart, or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can confirm the part first.
Need other parts? See the solution tank, handle and plumbing, the vacuum tank, motors and switches, or the A902 heater, or go back to all Mytee 1001DX-200 and 2008CS parts diagrams. You can also see the machine on mytee.com.


























