Mytee 10-32 Kep Nut H273

$1.57

Mytee #10-32 zinc kep nut with built-in lock washer (part# H273), sold individually. Used across the Mytee range, including the 8070, HP90, HP120 and 80-120.

The Mytee 10-32 Kep Nut H273 is a zinc-plated nut with a built-in toothed lock washer. The HP90 Stingray book calls for five and the Mytee Lite 8070 uses it in its base.

Compatible Models for the Mytee 10-32 Kep Nut H273

H273 is in the parts drawing for this hardware appears in parts drawing across most of the Mytee range, from the Mytee Lite and HP-series detailing extractors to the Speedster, LTD and Breeze carpet extractors, plus the S-300 spotters, the external heaters and the floor machines.

What the 10-32 Kep Nut Does

The attached star washer bites into the surface as the nut is tightened, so it resists vibration without a separate lock washer. It is used on 10-32 screws throughout the machine.

Signs It Needs Replacing

Replace a kep nut that has lost its grip, has damaged threads, or was dropped during a repair.

Specifications

  • Part number: H273
  • Thread: #10-32
  • Type: kep nut with attached lock washer
  • Finish: zinc (Mytee parts drawing)
  • Sold individually

Mytee notes that small hardware like this is cheapest to ship when it is ordered along with other parts, and a local hardware store may stock a match. Because the price is per piece, order the quantity your machine needs. Browse every numbered part on the Mytee HP90 Stingray parts diagrams, or see Mytee’s own listing for part H273 on mytee.com.

Find this part on the Mytee 1700 Focus parts diagrams, Mytee Lite 8070 parts diagrams, Mytee HP90 Stingray parts diagrams, Mytee HP120 Grand Prix parts diagrams, Mytee 80-120 Prep Center S parts diagrams, Mytee S-300 Tempo parts diagrams, Mytee S-300H Tempo Heated parts diagrams, Mytee 2002CS Contractor’s Special parts diagrams, Mytee 1000DX-200 and 2005CS parts diagrams, Mytee 1001DX-200 and 2008CS parts diagrams, Mytee 1003DX Speedster parts diagrams, Mytee 1005LX Speedster parts diagrams, Mytee LTD3 Speedster parts diagrams, Mytee LTD5-LX Speedster parts diagrams, Mytee LTD12-LX Speedster parts diagrams, Mytee BZ-102LX Breeze parts diagrams, Mytee BZ-102LXH Breeze parts diagrams, Mytee BZ-102LX-AUTO Breeze parts diagrams, Mytee BZ-105LX Breeze parts diagrams, Mytee BZ-105LX-AUTO Breeze parts diagrams, Mytee 7303LX Breeze parts diagrams, Mytee 7000LX Breeze parts diagrams, Mytee Hot Twin Turbo 480-120 Breeze parts diagrams, Mytee Hot Turbo 240-120 Breeze parts diagrams, Mytee Carpet Shark CRB3017 Breeze parts diagrams, Mytee Carpet Shark CRB3010 Breeze parts diagrams, and Mytee ECO17-PRO Breeze parts diagrams, where you can click it on Mytee’s factory drawing.

Frequently Asked Questions

What is a kep nut?

A nut with a toothed lock washer attached, so it resists loosening.

Where is the H273 used?

On 10-32 screws; the HP90 book lists five across its base and recovery-tank sheets.

What models is the 10-32 Kep Nut (part# H273) compatible with?

Most Mytee machines, including the 8070, HP90, HP120, 80-120, 2008CS and the models listed below.

How do I order the 10-32 Kep Nut (part# H273) or get help?

You can add the 10-32 Kep Nut (part# H273) to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Mytee equipment and can help confirm the right part for your machine.

Questions about the 10-32 Kep Nut (part# H273)? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Mytee 10-32 Kep Nut H273”

Your email address will not be published. Required fields are marked *