Mytee Lite 8070 Parts
Genuine Mytee Lite 8070 parts for Models 8070 and 8070-SS, from Mytee’s parts book. Find your part on the Mytee Lite 8070 parts diagrams; the full guide and FAQ are below the parts.
Showing 1–20 of 68 results
-

Mytee #6 x 3/16 in Self-Tapping Screw H274
$1.57 -

Mytee 1-5/8 in Cap H846B
$1.57 -

Mytee 1.25 in Snap-n-Lok Cuff-Lynx Male and Female H133
$15.67 -

Mytee 1/2 in Axle Cut Washer H254
$1.57 -

Mytee 1/4 in 45 Degree Brass Street Elbow B130
$8.69 -

Mytee 1/4 in 90 Degree Brass Street Elbow B103
$7.14 -

Mytee 1/4 in Barb x 1/4 in MPT 90 Degree Brass Elbow B152
$8.67 -

Mytee 1/4 in Barb x 1/4 in MPT Brass Adapter B109
$3.10 -

Mytee 1/4 in Brass Hex Nipple B107
$5.07 -

Mytee 1/4 in Brass Tee B113
$10.98 -

Mytee 1/4 in Female Quick Disconnect B259A
$25.03 -

Mytee 1/4 in Female Quick Disconnect, FPT B102
$28.19 -

Mytee 1/4 in Filter Adapter B112
$22.19 -

Mytee 1/4 in Filter Strainer B119
$7.21 -

Mytee 1/4 in FPT 90 Degree Brass Elbow B207
$9.40 -

Mytee 1/4 in Male Open-Spray Quick Disconnect B260A
$14.09 -

Mytee 1/4 in MPT Brass Check Valve B116
$31.31 -

Mytee 1/4 in Stainless Flat Washer H210
$1.57 -

Mytee 1/4 in Swivel Barb Adapter with Gasket B110
$6.26 -

Mytee 10 in Solution Hose AH106
$57.81
Mytee Lite 8070 parts for Models 8070 and 8070-SS
This category holds every Mytee Lite 8070 part we stock for the Mytee Lite heated carpet and upholstery spotter, Model 8070 and Model 8070-SS. Both models share one Mytee parts book; the 8070-SS is the same machine supplied with a stainless steel upholstery tool. To find a part by where it sits on the machine, open the Mytee Lite 8070 parts hub and click it on Mytee’s factory drawing.
What you will find here
The upper section of the machine: the P583 recovery tank and P584 solution tank, the 6-inch cap with its gasket and tether, the foam filter and mesh screen, the C302P three-stage vacuum motor and its two gaskets, the Cuff-Lynx inlet and bulkhead gasket, and the faucet-fill parts. The solution plumbing: strainers, adapters, brass elbows and nipples. The items Mytee ships with the machine: the 8501 15-foot hose combo, the H122V Cuff-Lynx reducer, the A110 drain hose, the 8400P Air Lite upholstery tool and the P590 Cuties covers. The lower section: the P585 base, axle, wheels and casters, the switch plate and rocker switches, the C305 120 PSI pump, the valves, quick disconnects and internal hoses. The heater: the A901 assembly and its casting, heating rod and two thermostats.
Choosing the right Mytee Lite part
Many Mytee Lite parts are shared with other Mytee machines, and each product page lists every model whose current Mytee parts book includes that part number. If a part fits the 8070 only, its title says Mytee Lite 8070. Suction loss is usually a sealing part such as the cap gasket, foam filter, motor gaskets or Cuff-Lynx; weak spray usually starts with the strainer or a quick disconnect. You can also shop the Mytee Lite 8070 machine, see the full Mytee lineup, or read about the machine on mytee.com. Twin City Vacuum has been selling and servicing cleaning equipment since 1956 at 5415 West Broadway, Crystal, MN 55428. Call 763-535-0770.
Frequently Asked Questions
Do Mytee Lite 8070 parts fit the 8070-SS?
Yes. The 8070-SS is the Mytee Lite supplied with a stainless steel upholstery tool, and both share one Mytee parts book.
Where can I see where each Mytee Lite part goes?
The Mytee Lite 8070 parts hub has Mytee’s factory drawings with a clickable dot on every numbered part.
Can I order a Mytee Lite part that is not listed here?
Yes. Call 763-535-0770 with the part number from the parts list and we will order it from Mytee.
