Mytee LTD3 Speedster Parts

Genuine Mytee LTD3 parts for the Speedster LTD, organized by Mytee’s factory drawings. Open the LTD3 parts hub to click your part on the diagram.

Showing 1–20 of 109 results

Mytee LTD3 parts for the Speedster LTD

This category holds every Mytee LTD3 part we stock for the LTD3 Speedster LTD, Mytee’s heated 500 PSI carpet extractor with auto-fill, pump-out and chemical injection. To find a part by where it sits on the machine, open the Mytee LTD3 Speedster parts hub and click it on Mytee’s factory drawing.

What you will find here

First, the high-pressure side: the C342 500 PSI pump, the C313C regulator, the H308D gauge, the hoses and the brass fittings and quick disconnects.Next, the heat and the chemical: the heating rods, thermostats and castings of the A908 1,600-watt heater, the P535 chemical bottle, the B117 strainer and the H325 flow meter.Then the water handling: the P509 solution tank and P513 lid, the H541A auto-fill float valve, the C381 pump-out pump and its garden-hose fittings.Finally, the recovery side and controls: the P510 vacuum tank, the clear lid and gasket, the filters, the drain valve, the float shut-off, the two C302LA vacuum motors, the P512 switch box and the H075 switch plate.

Choosing the right part

Each drawing on the hub has numbered dots, and the table under it lists the part number for every item. Match the item number on the drawing, not only the part name, because many fittings look alike. Many LTD3 parts are shared with the LTD5-LX, the LTD12-LX and other Speedsters, and each product page names every model it fits. The three drawings are the base, pump and pump-out, the solution tank, heater and chemical injection, and the vacuum tank, motors and switches.Mytee publishes the LTD3 parts list on the LTD3 page at mytee.com. If a part shows Call for price, or you are not sure which one you need, call Twin City Vacuum at 763-535-0770. We have sold and serviced cleaning equipment in Crystal, Minnesota since 1956.

Frequently Asked Questions

Which LTD3 parts wear out most often?

The vacuum lid gasket, the filters, the drain valve, the hose cuffs, the quick disconnects, the auto-fill float valve and the heater thermostats and rods.

Which pump-out pump does the LTD3 use?

The C381 3.3 GPM pump-out pump.

What if a part on the LTD3 parts list says Call?

Mytee does not sell every fastener, fitting and length of hose on its website. Call 763-535-0770 with the part number and we will order it for you.