Mytee Rubber Faucet Fill Adapter H178

$17.24

Mytee Rubber Faucet Fill Adapter (part# H178) for filling the solution tank from a sink. Fits the Mytee Lite 8070, HP90, HP120, Prep Center S, Speedster, Contractor’s Special and ECO PRO models (see full list).

The Mytee Faucet Fill Adapter H178 is the rubber adapter that lets you fill a Mytee machine’s solution tank straight from a sink faucet. On the Mytee Lite 8070 it is the end of the faucet-fill line that pushes over the faucet, connected to a clear fill tube that runs to the solution tank.

Compatible Models for the Mytee Faucet Fill Adapter H178

H178 is listed in the current Mytee parts drawing for every machine above.

What the faucet fill adapter Does

Instead of carrying buckets, you push the soft rubber adapter onto a faucet spout and run water down the fill tube into the solution tank. On the Mytee Lite the adapter is joined to a clear fill tube with a brass barb adapter. The rubber grips a range of spout sizes and seals well enough to fill without spraying.

Signs It Needs Replacing

Replace it when the rubber is split, stretched so it slips off the faucet, hardened, or torn where it joins the fill tube. A worn adapter sprays water while you fill and can pop off the spout.

Specifications

  • Part number: H178
  • Description: faucet fill (Mytee parts drawing); rubber faucet fill adapter (mytee.com)
  • Material: rubber
  • Connects to: the machine’s fill tube (on the 8070 through a B241 brass barb adapter)

Fill with the water temperature your chemical calls for, and keep the adapter clean so grit does not end up in the solution tank. Browse every numbered part on the Mytee Lite 8070 parts diagrams, or see Mytee’s own listing for part H178 on mytee.com.

Find this part on the Mytee Lite 8070 parts diagrams, Mytee HP90 Stingray parts diagrams, Mytee HP120 Grand Prix parts diagrams, Mytee 80-120 Prep Center S parts diagrams, Mytee 1000DX-200 and 2005CS parts diagrams, Mytee 1001DX-200 and 2008CS parts diagrams, Mytee 1003DX Speedster parts diagrams, Mytee 1005LX Speedster parts diagrams, and Mytee ECO17-PRO Breeze parts diagrams, where you can click it on Mytee’s factory drawing.

Frequently Asked Questions

What does the faucet fill adapter do on the Mytee Lite 8070?

It pushes onto a sink faucet so you can fill the solution tank through the fill tube without a bucket.

How do I know if my H178 faucet fill adapter needs replacing?

The rubber is split, hard or stretched, or it sprays and slips off the faucet.

What models is the Faucet Fill Adapter (part# H178) compatible with?

It is in the parts drawing for the Mytee Lite 8070, HP90, HP120, 80-120, 2008CS, 1000DX-200 (and 2005CS), 1001DX-200, 1003DX, 1005LX, ECO17-PRO and ECO14-PRO.

How do I order the Faucet Fill Adapter (part# H178) or get help?

You can add the Faucet Fill Adapter (part# H178) to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Mytee equipment and can help confirm the right part for your machine.

Questions about the faucet fill adapter (part# H178)? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Mytee Rubber Faucet Fill Adapter H178”

Your email address will not be published. Required fields are marked *