Mytee Vacuum Shut-Off Float Switch E373

$72.29

Mytee normally open mechanical float switch (part# E373) that shuts off the vacuum when the recovery tank is full. Fits the HP90, HP120, DX, LTD, Breeze and other Mytee models listed below.

The Mytee Vacuum Shut-Off Float Switch E373 is the normally open mechanical float switch that senses a full recovery tank. On the HP90 Stingray the book lists it as the level switch for vacuum shut-off, with rear threads for mounting through the tank.

Compatible Models for the Mytee Float Switch E373

E373 is in the parts drawing for the HP90, HP120, the DX extractors, LTD3, LTD5-LX, LTD12-LX, the Breeze models, 7303LX, 7000LX and ETM-LX-PLUS.

What the Vacuum Shut-Off Float Switch Does

As the recovery tank fills, the float rises and changes the switch state, which drops out the E632 relay and stops the vacuum motor. That keeps dirty water from being pulled through to the motor, which is one of the most common ways a vacuum motor is ruined.

Signs It Needs Replacing

Suspect the float switch if the vacuum shuts off with little water in the tank, keeps running when the tank is full, or cuts in and out. Lint and residue can make a float stick, so clean it before replacing it.

Specifications

  • Part number: E373
  • Type: mechanical float level switch, normally open
  • Mounting: rear threads (Mytee parts drawing)

Rinse the recovery tank after every job. A clean tank keeps the float free and makes the switch last much longer. Browse every numbered part on the Mytee HP90 Stingray parts diagrams, or see Mytee’s own listing for part E373 on mytee.com.

Find this part on the Mytee HP90 Stingray parts diagrams, Mytee HP120 Grand Prix parts diagrams, Mytee 1000DX-200 and 2005CS parts diagrams, Mytee 1001DX-200 and 2008CS parts diagrams, Mytee 1003DX Speedster parts diagrams, Mytee 1005LX Speedster parts diagrams, Mytee LTD3 Speedster parts diagrams, Mytee LTD5-LX Speedster parts diagrams, Mytee LTD12-LX Speedster parts diagrams, Mytee BZ-102LX Breeze parts diagrams, Mytee BZ-102LXH Breeze parts diagrams, Mytee BZ-102LX-AUTO Breeze parts diagrams, Mytee BZ-105LX Breeze parts diagrams, Mytee BZ-105LX-AUTO Breeze parts diagrams, Mytee 7303LX Breeze parts diagrams, Mytee 7000LX Breeze parts diagrams, and Mytee Escape ETM-LX-PLUS Breeze parts diagrams, where you can click it on Mytee’s factory drawing.

Frequently Asked Questions

What does the E373 float switch do?

It tells the machine the recovery tank is full so the vacuum motor shuts off.

How can I tell if the E373 switch is bad?

The vacuum stops too early, never stops, or cycles on and off. Clean the float first.

What models is the Float Switch (part# E373) compatible with?

HP90, HP120, DX extractors, LTD3, LTD5-LX, LTD12-LX, Breeze models, 7303LX, 7000LX and ETM-LX-PLUS.

How do I order the Vacuum Shut-Off Float Switch (part# E373) or get help?

You can add the Vacuum Shut-Off Float Switch (part# E373) to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Mytee equipment and can help confirm the right part for your machine.

Questions about the Vacuum Shut-Off Float Switch (part# E373)? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Mytee Vacuum Shut-Off Float Switch E373”

Your email address will not be published. Required fields are marked *