Tornado 98169 Parts | Marathon 1200 230V

REGISTER & ACTIVATE PRODUCT WARRANTY

What the Tornado 98169 parts catalog covers

The 98169 is a 12-gallon machine that carries its own solution and recovery capacity, drives a 17-inch carpet brush roller through a belt from a dedicated brush motor, and feeds solution through a pressurised spray bar. It is the 230-volt member of the Marathon 1200 pair: the 115-volt machine is the Tornado 98168 Marathon 1200, and the two share the large majority of their components. The difference is concentrated in a handful of electrically rated items — the pump, the solenoid valve, the brush motor and the power cord — where the 230-volt machine uses its own distinct part numbers. Mechanical parts such as bearings, brush rollers, shrouds, gaskets, hoses and fittings are common to both.

Because of that overlap, most parts you find here are also listed for other Marathon machines, including the 8-gallon Marathon 800 in both its 115-volt form (model 98166) and its 230-volt form (model 98167). Each part page lists every machine the component is confirmed to fit, so you can order one part with confidence whether you run one extractor or a mixed fleet.

Working from the right assembly

Tornado 98169 parts are grouped here by assembly rather than by part type, which is how the machine’s own drawings are organised. Pick the assembly that matches the drawing you are reading. The tank assembly holds the solution bladder, lids, gaskets and drain hardware. The brush assembly covers the roller, bearings, belt, shroud and brush motor. The pump assembly carries the solution pump, solenoid valve and in-line strainer, and the control panel holds the switches and harness. If you are tracing a wiring fault or a solution-flow problem rather than replacing a specific component, start with the electrical and wiring diagram or the plumbing guide diagram — those two are reference sheets rather than parts lists, and they are the fastest route to the component that is actually at fault. For routine upkeep, the service parts page gathers the wear items in one place.

Frequently Asked Questions

Will Tornado 98168 parts fit the 98169?

Most of them will. The 98168 is the 115-volt Marathon 1200 and the 98169 is the 230-volt version of the same machine, so the chassis, tank, brush and plumbing components are shared. The exceptions are the voltage-rated electrical parts — the solution pump, the solenoid valve, the brush motor and the power cord — which carry different part numbers on the 230-volt machine. Check the part number on the page before ordering, or call us at 763-535-0770.

Which series of the Tornado 98169 do these parts cover?

The 98169 is catalogued in several production series, B through F. The listings here are built from the Series F drawings, which are the most recent, and the overwhelming majority of part numbers are unchanged across the earlier series. If your machine is an older unit and a part looks different from the drawing, call us with the serial number and we will confirm which revision you have.

How do I find the right Tornado 98169 part if I do not have the diagram?

Tell us the symptom and we will work back to the part. Call 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428. Our staff has been servicing Tornado extractors since 1956, and in most cases a short description of what the machine is doing is enough to identify the component.

Not sure which Tornado 98169 part you need? Call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428. We have been selling and servicing Tornado floor-care equipment since 1956, and we can confirm the right part against your machine’s serial number before you order. You can also browse the full Tornado 98169 20" Marathon 1200 (12 Gallon, 230V) parts catalog or the wider Tornado cleaning equipment parts range, and see the machine’s own specifications on the Tornado manufacturer site.