CleanMax Nitro CMNR-QD Cover Plate B283-4100
$4.99
Genuine CleanMax Nitro CMNR-QD cover plate (part# B283-4100). Closes and seals a body access opening. Call 763-535-0770.
The Nitro CMNR-QD Cover Plate (part# B283-4100) is a molded panel on the CleanMax Nitro commercial upright that closes off and seals an access opening in the body. It keeps the components behind it protected and keeps the body’s airflow and appearance intact.
Compatible Models for the Nitro CMNR-QD Cover Plate
This is a genuine Tacony OEM part built for the CleanMax Nitro CMNR-QD. CleanMax shares many components across its commercial upright range, so if you run a related CleanMax commercial model, call 763-535-0770 and we will confirm fit before you order.
What the Nitro CMNR-QD Cover Plate does
The cover plate caps an opening in the Nitro body used during assembly or service, sealing out dust and keeping fingers and debris away from the parts behind it. On a sealed-airflow commercial vacuum a properly fitted plate matters for more than looks: if it does not seat and seal, it becomes an air leak that bleeds suction away from the nozzle. It also keeps the internal components covered so the machine survives the knocks of daily commercial use.
Signs the Nitro CMNR-QD Cover Plate needs replacing
Replace the cover plate if it is cracked, warped, or missing, or if its screw bosses or tabs are broken so it will not stay seated flush. A plate that rattles, whistles, or leaves a gap is leaking air and letting in dust and should be replaced to restore the seal.
Installation and fit
Unplug the machine. Remove the retaining screws or release the tabs, take off the old plate, then position the new plate on its locating features and fasten it so it sits flush and sealed with no gap. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Cover Plate do on the CleanMax Nitro CMNR-QD?
It closes and seals an access opening in the body, protecting the components behind it and preventing an air leak that would otherwise bleed suction away from the nozzle.
How do I know if my Nitro CMNR-QD Cover Plate needs replacing?
Replace it if it is cracked, warped, or missing, or if broken tabs or screw bosses stop it sitting flush. A gap, rattle, or whistle means it is leaking air.
What models is the Cover Plate (part# B283-4100) compatible with?
It is the genuine body cover plate for the CleanMax Nitro CMNR-QD commercial upright. Call 763-535-0770 to confirm fit on a related CleanMax model.
How do I order the Cover Plate (part# B283-4100) or get help?
You can add the Cover Plate (part# B283-4100) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
