CleanMax Nitro CMNR-QD Filter Cover Green B283-0134
$5.99
Genuine CleanMax Nitro CMNR-QD green filter cover (part# B283-0134). Retains and seals the exhaust filter. Call 763-535-0770.
The Nitro CMNR-QD Filter Cover (part# B283-0134) is the green access panel on the CleanMax Nitro commercial upright that holds the exhaust or final filter in place and seals the filter compartment. It is the door you open every time you check or change the filter, so its latches and gasket surface see constant use.
Compatible Models for the Nitro CMNR-QD Filter Cover
This is a genuine Tacony OEM part built for the CleanMax Nitro CMNR-QD. CleanMax shares many components across its commercial upright range, so if you run a related CleanMax commercial model, call 763-535-0770 and we will confirm fit before you order.
What the Nitro CMNR-QD Filter Cover does
The filter cover clamps the filter against its seat and closes off the filter chamber so all of the air the motor pushes out passes through the filter media rather than leaking around it. On a commercial machine that captures fine dust all day, a properly sealing cover is what keeps filtered air filtered — if air can slip past the cover, fine dust blows straight back into the room and the filtration rating no longer means anything. The cover also protects the filter from being knocked or crushed in transport and storage.
Signs the Nitro CMNR-QD Filter Cover needs replacing
Replace the cover if the latches or tabs are broken so it will not click shut and stay tight, if it is cracked, or if the sealing edge is warped and no longer presses the filter down evenly. Dust streaking on the wall behind the exhaust, a filter that shifts or falls out, or a cover you have to hold closed are all signs the cover is no longer sealing and should be replaced.
Installation and fit
Unplug the vacuum and remove the filter first if you are only changing the cover. Align the new green cover on its hinge or lower tabs, press it closed until the latches engage, and confirm it holds the filter firmly with no gap around the edge. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Filter Cover do on the CleanMax Nitro CMNR-QD?
It retains the exhaust filter and seals the filter compartment so all motor exhaust passes through the filter media instead of leaking around it, preserving the machine’s filtration.
How do I know if my Nitro CMNR-QD Filter Cover needs replacing?
Replace it if the latches are broken, it is cracked, or the sealing edge is warped so it no longer holds the filter tight. Dust streaks behind the exhaust or a cover that will not stay shut are clear signs.
What models is the Filter Cover (part# B283-0134) compatible with?
It is the genuine green filter cover for the CleanMax Nitro CMNR-QD commercial upright. Call 763-535-0770 to confirm fit on a related CleanMax model.
How do I order the Filter Cover (part# B283-0134) or get help?
You can add the Filter Cover (part# B283-0134) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
