Tornado CK ULW 13/1 Parts

Genuine Tacony replacement Tornado CK ULW 13/1 parts for model TV280-W12-U, the 13-inch ultra-lightweight commercial upright. Shop the diagrams below, or call 763-535-0770.

Choosing the right Tornado CK ULW 13/1 parts

The CK ULW 13/1 is Tornado’s badge on the Tacony ultralight upright platform, which means most of what is on this page is shared hardware rather than a Tornado-only component. The same belt, baseplate, agitator, wheels and handle fittings appear on Riccar R10-series, Simplicity and CleanMax ultralight uprights, and our listings name every machine a part fits so you can order with confidence whichever badge is on your machine. Where a part genuinely is exclusive to this model — the nozzle cover, for instance — the listing says so.

The machine breaks down into two factory assemblies. The nozzle assembly covers everything from the floor up: the baseplate and its wheels, the wooden agitator and its belt, the motor and fan, the scroll housings, the headlight and its socket, the pedal and the basetray. The handle and body assembly covers the handle tube and grip, the two-speed switch, the cord hooks and pigtail, the neck couplings, the bag mount and the hard shell bag. Working out which assembly your part belongs to is usually the quickest way to find it.

A few parts are worth knowing about before you order. The belt is sold as a single or as a two-pack, and the baseplate comes in a standard version and a soft-carpet version — the soft-carpet baseplate is an option rather than a replacement, so check which one your machine has before ordering. Bags come in three forms: a HEPA media bag sold singly, the same HEPA media in a six-pack, and a plain paper bag. All three fit the same bag mount.

If you are diagnosing rather than replacing a known part, the order that saves the most time is: bag and bag seal first, then belt and agitator, then the baseplate and its wheels, and only then the motor. Most complaints of “no suction” on an ultralight upright turn out to be an air leak or a worn belt rather than a failed motor, and the parts involved cost a fraction of the price.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. If you cannot identify a part from the diagram, call 763-535-0770 and we will work it out with you. You can also browse the full Tornado cleaning equipment parts range, see the machine on our Tornado CK ULW 13/1 product page, or read the manufacturer’s specifications at tornadovac.com.

Frequently Asked Questions about Tornado CK ULW 13/1 parts

What parts fit the Tornado CK ULW 13/1?

Every part on this page comes from the factory parts diagrams for the CK ULW 13/1 (model TV280-W12-U) — the nozzle assembly and the handle and body assembly. Most are shared Tacony components that also fit Riccar, Simplicity and CleanMax ultralight uprights, and each listing names every machine it fits.

Is the Tornado CK ULW 13/1 the same machine as a Riccar or CleanMax ultralight?

No, but they are close relatives. The CK ULW 13/1 is built on the same Tacony ultralight platform as the Riccar R10 series, the CleanMax CMP-3 series and several Simplicity models, under different brands, and it shares the great majority of its parts with them. That is why so many of these listings name several brands.

My CK ULW 13/1 has lost suction. What should I check first?

Start with the bag and the airway rather than the motor. Check the bag is not full and is seated on its collar, then look at the bag mount seal, the handle duct and the inlet duct cover for splits or a poor seal. After that check the belt and the brush roll — a worn belt lets the agitator slow under load, which reads as lost cleaning power even when suction is fine.

How often should the belt and brush roll be replaced?

There is no fixed interval — it depends on hours and on what the machine picks up. The practical test is to look: a belt that has gone glazed, stretched or cracked should be replaced, and a wooden agitator whose bristles no longer reach past the baseplate opening is no longer agitating the carpet. Both are inexpensive and both are the usual cause of a machine that feels tired.

Can you help me find a CK ULW 13/1 part that is not listed?

Yes. Call 763-535-0770 with your model and serial number. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can identify a part from the factory diagram with you rather than guessing.