CleanMax CM-WAV Brush Trigger Switch 19849
$28.99
Genuine Tacony CleanMax CM-WAV brush trigger switch (part# 19849) — controls the agitator motor from the handle. Fits the CleanMax CM-WAV. In stock, Crystal MN. Call 763-535-0770.
The CleanMax CM-WAV Brush Trigger Switch (part# 19849) is the trigger switch that controls the brush motor on the CM-WAV wide-area vacuum, letting the operator turn the agitator on and off from the handle.
Compatible Models for the Brush Trigger Switch
- CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)
What the Brush Trigger Switch does
The brush trigger switch is the operator control for the agitator drive. Pulling or pressing the trigger closes the circuit to the brush motor so the agitator spins; releasing or toggling it stops the brush while suction can continue. On a wide-area machine that alternates between carpet and bare-floor work, a reliable brush switch lets the operator engage the agitator only when it is needed.
Signs the Brush Trigger Switch needs replacing
Replace the trigger switch if the brush motor no longer responds to it, runs only when the trigger is held at a certain angle, or stays on or off regardless of the trigger. Intermittent brush operation that changes when the switch or handle is wiggled points to a worn switch or its contacts and should be renewed for safe, predictable control.
Installation and fit
With power disconnected, remove the old switch, transfer the wiring to the matching terminals on the new 19849 switch, and secure it in the handle or body. Test that the brush motor starts and stops cleanly with the trigger before returning the machine to service. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Brush Trigger Switch do on the CleanMax CM-WAV?
It is the operator control for the brush (agitator) motor, turning the agitator on and off from the handle so it runs only when needed.
How do I know if my CM-WAV brush trigger switch needs replacing?
Replace it if the brush motor no longer responds, runs only at a certain trigger angle, or stays on or off regardless of the trigger. Intermittent operation when the switch is wiggled is a sign.
What models is the Brush Trigger Switch (part# 19849) compatible with?
The Brush Trigger Switch (part# 19849) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.
How do I order the Brush Trigger Switch (part# 19849) or get help?
You can add the Brush Trigger Switch (part# 19849) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
