CleanMax CM-WAV Conduit Nut 33203
$2.99
Genuine Tacony CleanMax CM-WAV conduit nut (part# 33203) — locks a cord conduit or relief fitting to the body. Fits the CleanMax CM-WAV. In stock, Crystal MN. Call 763-535-0770.
The CleanMax CM-WAV Conduit Nut (part# 33203) is a conduit nut on the CM-WAV wide-area vacuum that locks a cord conduit or strain-relief fitting to the body, keeping the wiring pass-through fixed.
Compatible Models for the Conduit Nut
- CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)
This is a genuine Tacony hardware item used on the CleanMax CM-WAV. The same size fastener may appear on other Tacony machines; call 763-535-0770 if you would like us to confirm the exact part for your model.
What the Conduit Nut does
This conduit nut threads onto a cord conduit or relief fitting from inside the body and clamps it against the housing so the pass-through cannot rotate or loosen. It keeps the cable entry solid and the internal wiring protected from movement. It does a similar job to the machine’s other conduit nut but is sized and located for its own fitting on the CM-WAV.
Signs the Conduit Nut needs replacing
Replace the conduit nut if it is cross-threaded, stripped, or corroded so it will not tighten, or if the fitting it retains turns or works loose in the body. A cable entry that rotates as a unit when the cord is twisted, despite the fitting itself being intact, points to this nut having lost its hold.
Installation and fit
With power off, thread the new 33203 nut onto its conduit or relief fitting from inside the body and tighten so the fitting is locked firmly against the housing and cannot rotate. Confirm the cable entry is solid before use. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Conduit Nut do on the CleanMax CM-WAV?
It threads onto a cord conduit or relief fitting and clamps it to the body so the wiring pass-through cannot rotate or loosen.
How do I know if my CM-WAV conduit nut needs replacing?
Replace it if it is cross-threaded, stripped, or corroded so it will not tighten, or if the fitting it holds turns or works loose in the body.
What models is the Conduit Nut (part# 33203) compatible with?
The Conduit Nut (part# 33203) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.
How do I order the Conduit Nut (part# 33203) or get help?
You can add the Conduit Nut (part# 33203) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
