CleanMax CM-WAV Cam Handle Kit 33102-KIT

The CleanMax CM-WAV Cam Handle Kit (part# 33102-KIT) is the complete cam-lever handle-lock kit for the CM-WAV wide-area vacuum, bundling the cam-lever parts that lock and release the handle at its set position.

Compatible Models for the Cam Handle Kit

• CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)

What the Cam Handle Kit does

The CM-WAV uses a cam-lever mechanism to lock the handle where the operator sets it and release it to recline. This kit supplies the cam-lever assembly and its related hardware together, so a worn or broken handle lock can be rebuilt in one part rather than sourcing the stud, pin, and washer separately. It restores the positive click-and-hold action of the handle lock.

Signs the Cam Handle Kit needs replacing

Fit the cam handle kit when the handle no longer locks or releases cleanly — it slips out of position under load, feels loose or sloppy at the lever, or the lever no longer holds the handle at the chosen angle. When several cam-lever components are worn together, the kit is the most economical and complete fix rather than replacing them one at a time.

Installation and fit

Disassemble the old cam-lever parts from the handle joint and rebuild it with the components in the 33102-KIT, following the parts diagram for orientation. Confirm the lever locks the handle firmly and releases smoothly before returning the machine to service. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the Cam Handle Kit do on the CleanMax CM-WAV?

It is the complete cam-lever handle-lock kit — the parts that lock the handle at its set position and release it to recline, supplied together to rebuild a worn handle lock.

How do I know if my CM-WAV needs the cam handle kit?

Fit it when the handle will not lock or release cleanly, slips out of position under load, or feels loose at the lever. The kit rebuilds the whole mechanism at once.

What models is the Cam Handle Kit (part# 33102-KIT) compatible with?

The Cam Handle Kit (part# 33102-KIT) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the Cam Handle Kit (part# 33102-KIT) or get help?

You can add the Cam Handle Kit (part# 33102-KIT) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.