CleanMax CM-WAV Grooved Handle Bracket 19798

The CleanMax CM-WAV Grooved Handle Bracket (part# 19798) is the bracket that locates and secures the handle to the body of the CM-WAV wide-area vacuum, its grooves indexing the handle so it seats in the correct position.

Compatible Models for the Grooved Handle Bracket

• CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)

What the Grooved Handle Bracket does

The grooved handle bracket anchors the handle to the machine and holds it at the right angle and depth. The grooves register against the mating handle hardware so the handle cannot twist or slip once tightened, giving the operator a solid, repeatable connection every time the handle is set. It carries the push-pull loads of daily wide-area cleaning.

Signs the Grooved Handle Bracket needs replacing

Replace the bracket if it is cracked, if the grooves are worn or stripped so the handle no longer locks in place, or if the mounting holes have elongated and let the handle shift. A handle that wobbles, rotates, or will not stay at its set angle after the fasteners are tightened usually points to a worn grooved bracket rather than the handle itself.

Installation and fit

Remove the handle hardware, swap in the new 19798 bracket so its grooves engage the mating part, and torque the fasteners so the handle seats firmly with no rotation. Check that the handle locks at its correct angle before use. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the Grooved Handle Bracket do on the CleanMax CM-WAV?

It locates and secures the handle to the body; its grooves index the handle so it seats in the right position and cannot twist once tightened.

How do I know if my CM-WAV handle bracket needs replacing?

Replace it if it is cracked, the grooves are stripped so the handle will not lock, or the mounting holes have elongated and the handle shifts or rotates after tightening.

What models is the Grooved Handle Bracket (part# 19798) compatible with?

The Grooved Handle Bracket (part# 19798) fits the CleanMax CM-WAV wide-area commercial upright vacuum. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the Grooved Handle Bracket (part# 19798) or get help?

You can add the Grooved Handle Bracket (part# 19798) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.