CleanMax CM-WAV 8-32 x 1/2 in Screw 33114

The CleanMax CM-WAV 8-32 x 1/2 in Screw (part# 33114) is an #8-32 machine screw, 1/2 inch long, used on the CM-WAV wide-area vacuum to fasten a light-to-medium-duty joint sized for #8 thread.

Compatible Models for the 8-32 x 1/2 in Screw

• CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)

This is a genuine Tacony hardware item used on the CleanMax CM-WAV. The same size fastener may appear elsewhere on the machine and on other Tacony models; call 763-535-0770 to confirm the exact part and its position on your machine.

What the 8-32 x 1/2 in Screw does

The #8-32 size is a step down from the machine’s structural 1/4-20 screws and a step up from the small #6 fasteners, so this screw holds covers, brackets, and mounts that carry moderate load. At 1/2 inch long it suits joints of medium depth, threading into a nut or a molded boss to clamp the parts firmly.

Signs the 8-32 x 1/2 in Screw needs replacing

Replace this screw if its #8-32 thread is stripped, the drive recess is chewed, or it is bent or corroded so it no longer draws its joint tight. A screw that spins without clamping, or whose head cannot be driven, should be renewed with the same #8-32 x 1/2-inch size.

Installation and fit

Start the new 33114 screw straight into its hole and tighten to clamp the joint, taking care not to overdrive and strip a molded boss. Keep it to its own position if similar #8 screws are used nearby. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the 8-32 x 1/2 in Screw do on the CleanMax CM-WAV?

It is an #8-32 machine screw that fastens light-to-medium-duty joints such as covers, brackets and mounts, threading into a nut or molded boss.

How do I know if my CM-WAV 8-32 screw needs replacing?

Replace it if the thread is stripped, the drive recess is chewed, or it is bent or corroded so it spins without clamping its joint.

What models is the 8-32 x 1/2 in Screw (part# 33114) compatible with?

The 8-32 x 1/2 in Screw (part# 33114) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the 8-32 x 1/2 in Screw (part# 33114) or get help?

You can add the 8-32 x 1/2 in Screw (part# 33114) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.