Strain Relief 1″ 30084

Compatible Models for the Strain Relief 1″

• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series J
• CleanMax CM-WAV Wide Area Vacuum
• Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum

The Strain Relief 1 in (part# 30084) is the 1-inch cord strain relief that anchors the power cord where it enters these 30-inch wide-area vacuums, taking the pull off the internal wiring connections. Fits Tornado 93030, CleanMax CM-WAV and Powr-Flite PF2030.

These machines are built on the same wide-area platform under different brands and share the great majority of their parts.

What the Strain Relief does

The strain relief clamps the power cord at the point it passes into the machine body. When the cord is tugged, dragged, or wrapped, the strain relief absorbs that force so it is not transmitted to the soldered or terminated connections inside — protecting the wiring from working loose or fracturing. On a commercial machine whose cord is pulled around constantly, it is an important safety component.

Signs the Strain Relief needs replacing

Replace the strain relief if it is cracked, if it no longer grips the cord firmly so the cord slides in and out of the body, or if the cord jacket at the entry point is chafed because the relief failed. A loose cord at the entry, or visible movement of the internal wiring when the cord is pulled, means the strain relief is no longer doing its job and should be renewed for safety.

Installation and fit

With power disconnected, release the old relief, seat the cord in the new 30084 1-inch relief, and lock it into the body opening so the cord is held firmly with no slippage. Confirm the cord cannot be pulled through before returning the machine to service. Twin City Vacuum has sold and serviced Tacony equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the Strain Relief do on the CleanMax CM-WAV?

It clamps the power cord where it enters the body and absorbs pulling force so the strain is not transmitted to the internal wiring connections.

How do I know if my CM-WAV strain relief needs replacing?

Replace it if it is cracked, no longer grips the cord so the cord slides in and out, or the cord jacket at the entry is chafed. Any movement of the internal wiring when the cord is tugged is a safety flag.

What models is the Strain Relief (part# 30084) compatible with?

The Strain Relief 1″ (part# 30084) fits: Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series J; CleanMax CM-WAV Wide Area Vacuum; and Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum. If your machine is not on this list, call 763-535-0770 and we will confirm it against your serial number before you order.

The Strain Relief (part# 30084) fits the wide-area commercial upright vacuum. If you run a different Tacony model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the Strain Relief (part# 30084) or get help?

You can add the Strain Relief (part# 30084) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956 and can confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.