CleanMax CM-WAV Strain Restraint 33191

The CleanMax CM-WAV Strain Restraint (part# 33191) is the strain-restraint fitting on the CM-WAV wide-area vacuum that grips and anchors a cord or cable where it enters the body, protecting the connection behind it.

Compatible Models for the Strain Restraint

• CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)

This is a genuine Tacony hardware item used on the CleanMax CM-WAV. The same size fastener may appear on other Tacony machines; call 763-535-0770 if you would like us to confirm the exact part for your model.

What the Strain Restraint does

The strain restraint clamps the cord at its entry point so pulling, dragging, or flexing the cord is absorbed by the fitting rather than the wiring terminals inside. It is retained by its lock nut (part# 33192) and together they keep the cord entry solid through the constant cord handling a commercial machine sees. A sound restraint is a basic electrical-safety component.

Signs the Strain Restraint needs replacing

Replace the strain restraint if it is cracked, no longer grips the cord so the cord slides in and out, or the cord jacket at that point is chafed. If the internal wiring moves when the cord is tugged, the restraint is no longer doing its job and should be renewed, along with its lock nut if that is also worn.

Installation and fit

With power off, release the old restraint and its lock nut, seat the cord in the new 33191 restraint, fit it into the body opening, and lock it with its nut so the cord is held with no slippage. Confirm the cord cannot be pulled through before use. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the Strain Restraint do on the CleanMax CM-WAV?

It grips and anchors the cord at the body entry so pulling force is absorbed by the fitting instead of the wiring terminals inside.

How do I know if my CM-WAV strain restraint needs replacing?

Replace it if it is cracked, no longer grips so the cord slides, or the cord jacket is chafed. Movement of the internal wiring when the cord is tugged is a safety flag.

What models is the Strain Restraint (part# 33191) compatible with?

The Strain Restraint (part# 33191) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the Strain Restraint (part# 33191) or get help?

You can add the Strain Restraint (part# 33191) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.