Cam Lever Handle 33102

Compatible Models for the Cam Lever Handle

• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series H and J
• Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V — Series J
• CleanMax CM-WAV Wide Area Vacuum
• Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum

The Cam Lever Handle (part# 33102) is the cam lever itself in the handle lock of these 30-inch wide-area vacuums, the lever the operator throws to clamp the handle at its set position and release it to recline. Fits Tornado 93030, Tornado 93031, CleanMax CM-WAV and Powr-Flite PF2030.

These machines are built on the same wide-area platform under different brands and share the great majority of their parts.

What the Cam Lever Handle does

The cam lever is the part the operator actually grips and flips to lock or free the handle. Its cam profile converts the small motion of the lever into a strong clamping force on the handle joint, so a light flick holds the handle rock-solid and another frees it. It is the heart of these machines cam-lever handle mechanism and the piece that sees the most direct handling.

Signs the Cam Lever Handle needs replacing

Replace the cam lever if it is cracked, if its cam face is worn so it no longer clamps firmly, or if the lever is loose, floppy, or will not stay in the locked position. A handle that slips even after the cam washer, pin and stud are renewed usually means the lever’s cam profile itself has worn and the lever should be replaced.

Installation and fit

Remove the old lever from the cam-lever stack, fit the new 33102 lever onto its pin and stud in the correct orientation, and reassemble the mechanism. Throw the lever to confirm it clamps the handle solid and releases cleanly before returning the machine to service. Twin City Vacuum has sold and serviced Tacony equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the Cam Lever Handle do on the CleanMax CM-WAV?

It is the lever the operator throws to lock and release the handle; its cam profile turns a light flick into a strong clamp on the handle joint.

How do I know if my CM-WAV cam lever needs replacing?

Replace it if it is cracked, its cam face is worn, or it is loose and will not stay locked — especially if the handle still slips after the cam washer, pin and stud have been renewed.

What models is the Cam Lever Handle (part# 33102) compatible with?

The Cam Lever Handle (part# 33102) fits: Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series H and J; Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V — Series J; CleanMax CM-WAV Wide Area Vacuum; and Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum. If your machine is not on this list, call 763-535-0770 and we will confirm it against your serial number before you order.

The Cam Lever Handle (part# 33102) is listed for the wide-area commercial upright. If you run a different Tacony model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the Cam Lever Handle (part# 33102) or get help?

You can add the Cam Lever Handle (part# 33102) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956 and can confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.