14 in. Medium Scrub Brush (0.9 mm PPL) 48914040

$111.99

Genuine OEM 14 inch medium scrub brush (part# 48914040) with 0.9 mm polypropylene bristle, for Tornado disc scrubbers. The general-purpose fill; a twin-disc machine takes two.

Genuine OEM 14 inch (355 mm) medium disc brush (part# 48914040) for Tornado floor scrubbers — the machines it fits are listed below. The bristle is 0.9 mm polypropylene, and a twin-disc machine carries two, so replace them in pairs to keep both sides wearing and cleaning the same.

This is the brush most machines should be running most of the time. At 0.9 mm the bristle is stiff enough to hold its shape under the machine’s down-pressure and work soil out of a floor’s texture, but not so stiff that it skates on a smooth surface or marks a coating. On general commercial flooring — sealed concrete, vinyl composition tile, most ceramic, warehouse and back-of-house areas — it does the job a soft brush under-cleans and a grit brush over-attacks.

Choose around it rather than fighting it. If the floor is polished or freshly coated and you are seeing dulling or swirl, drop to the 0.6 mm soft. If soil is baked on, the floor is heavily textured, or you are stripping, move up to a grit or heavy nylon fill. Adding down-pressure to the wrong brush mostly adds motor load and brush wear.

Wear is measured, not guessed. New bristle length is the benchmark; by the time the bristles are around half gone the brush has lost its flex and its contact patch, and cleaning falls off faster than the wear suggests. Check for splaying and permanent bend too, which come from running too hard or from storing the brush face-down — keep brushes on their hubs or hung.

Compatible Models

This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What is the 14 inch medium brush (part# 48914040) best for?

General commercial flooring — sealed concrete, VCT, most ceramic, warehouse and back-of-house areas. The 0.9 mm bristle holds its shape under down-pressure and works soil out of floor texture without marking a coating.

When should I use something other than the medium brush?

Drop to the 0.6 mm soft if a polished or freshly coated floor is dulling or showing swirl; step up to a grit or heavy nylon fill for baked-on soil, heavy texture or stripping. Adding down-pressure to the wrong brush mainly adds motor load and brush wear.

Do I need to replace both brushes at once?

On a twin-disc machine, yes — replace them in pairs. A new brush on one side and a half-worn one on the other gives uneven cleaning and uneven wear.

How do I order the 14 in. Medium Scrub Brush (part# 48914040) or get help?

You can add the 14 in. Medium Scrub Brush (part# 48914040) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the 14 in. medium scrub brush (0.9 mm ppl) (part# 48914040) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “14 in. Medium Scrub Brush (0.9 mm PPL) 48914040”

Your email address will not be published. Required fields are marked *