Nozzle and Body 1/8″ MPT 95° X9139
$40.99
Genuine Tacony OEM spray nozzle and body, 1/8 inch male pipe thread with a 95 degree fan (part# X9139), for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S.
The Nozzle and Body 1/8″ MPT 95° (part# X9139) is a genuine Tacony OEM replacement part from the brush assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the spray nozzle assembly that atomises solution into a 95 degree fan pattern onto the carpet. It also fits the Tornado 98168 20″ Marathon 1200 carpet extractor (12 Gallon 115V), all series (B, C, D, E, F and P).
What the Nozzle and Body 1/8″ MPT 95° does
The fan angle is a design figure, not a preference. Ninety-five degrees is what makes adjacent nozzles overlap correctly at the height the manifold sits, so the whole width is covered without heavy bands where two patterns meet. Fit a different angle and the coverage either stripes or doubles up, which shows as uneven cleaning and uneven drying rather than as an obvious spray fault.
When to replace the Nozzle and Body 1/8″ MPT 95° (X9139)
Replace it when the pattern has gone from a clean fan to a stream, a distorted shape or a dribble, or when the orifice has worn open and the machine is using more solution than it used to. Nozzles wear gradually, so compare across the set rather than judging one on its own.
Nozzle Body X9139 — fitment and installation notes
Replace nozzles as a set where you can, since one new nozzle among worn ones puts more solution down in one place. Never clear an orifice with wire or a pin, because scoring the orifice destroys the pattern permanently, and check each nozzle fires evenly at working pressure before the machine returns to service. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Nozzle and Body 1/8″ MPT 95°
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
- Tornado 98168 20″ Marathon 1200 Carpet Extractor (12 Gallon 115V) — all series (B, C, D, E, F and P)
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Nozzle and Body 1/8″ MPT 95° do on the Tornado Marathon SE 900?
The fan angle is a design figure, not a preference. Ninety-five degrees is what makes adjacent nozzles overlap correctly at the height the manifold sits, so the whole width is covered without heavy bands where two patterns meet. Fit a different angle and the coverage either stripes or doubles up, which shows as uneven cleaning and uneven drying rather than as an obvious spray fault.
How do I know if my Nozzle and Body 1/8″ MPT 95° needs replacing?
Replace it when the pattern has gone from a clean fan to a stream, a distorted shape or a dribble, or when the orifice has worn open and the machine is using more solution than it used to. Nozzles wear gradually, so compare across the set rather than judging one on its own.
What models is the Nozzle and Body 1/8″ MPT 95° (part# X9139) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Nozzle and Body 1/8″ MPT 95° (part# X9139) or get help?
You can add the Nozzle and Body 1/8″ MPT 95° (part# X9139) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
