CleanMax Nitro CMNR-QD Pigtail Power Cord with Cord Clamp 1.8 ft A434-6900
$34.99
Genuine CleanMax Nitro CMNR-QD pigtail power cord with cord clamp, 1.8 ft (part# A434-6900). Internal lead to the switch/motor. Call 763-535-0770.
The Nitro CMNR-QD Pigtail Power Cord (part# A434-6900) is the short 1.8-foot internal lead, supplied with its cord clamp, that connects the machine’s main power cord to the internal wiring, switch, and motor on the CleanMax Nitro commercial upright. It is the fixed stub inside the body that the long 40-foot cord ties into.
Compatible Models for the Nitro CMNR-QD Pigtail Power Cord
This is a genuine Tacony OEM part built for the CleanMax Nitro CMNR-QD. CleanMax shares many components across its commercial upright range, so if you run a related CleanMax commercial model, call 763-535-0770 and we will confirm fit before you order.
What the Nitro CMNR-QD Pigtail Power Cord does
This pigtail carries line power from the strain-relief entry point into the machine to the switch and motor circuit, and the included cord clamp anchors it so vibration and cord tugs are taken by the clamp rather than by the wire terminals. Because it lives inside the body near the motor, it is built with heat-resistant insulation and the correct terminals for the Nitro’s connections. A sound pigtail and clamp are what keep the internal power connection tight and safe over thousands of on-off cycles.
Signs the Nitro CMNR-QD Pigtail Power Cord needs replacing
Replace the pigtail if the insulation is cracked, brittle, or heat-discolored, if terminals are loose, corroded, or scorched, or if the cord clamp is broken so the lead can be pulled at its connections. Intermittent power that is not caused by the external cord, a burnt smell inside the body, or a clamp that no longer grips are all reasons to replace this lead rather than patch it.
Installation and fit
Unplug the machine and discharge power before opening the body. Note the terminal positions, transfer the connections one at a time to the new pigtail so nothing is mis-wired, and secure the included cord clamp so the lead cannot move at its terminals. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Pigtail Power Cord do on the CleanMax Nitro CMNR-QD?
It is the short internal lead that connects the main cord to the switch and motor wiring inside the body, and its cord clamp anchors the lead so tugs and vibration do not stress the terminals.
How do I know if my Nitro CMNR-QD Pigtail Power Cord needs replacing?
Replace it if the insulation is cracked or heat-discolored, terminals are loose, corroded, or scorched, or the cord clamp is broken. A burnt smell inside the body is a warning sign.
What models is the Pigtail Power Cord (part# A434-6900) compatible with?
It is the genuine internal pigtail lead with clamp for the CleanMax Nitro CMNR-QD commercial upright. Call 763-535-0770 to confirm fit on a related CleanMax model.
How do I order the Pigtail Power Cord (part# A434-6900) or get help?
You can add the Pigtail Power Cord (part# A434-6900) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
