CleanMax ZM-700 Dowel Pin A018-1000
$2.99
Genuine CleanMax ZM-700 dowel pin (part# A018-1000). Locates and aligns mating parts in the assembly. Call 763-535-0770.
The ZM-700 Dowel Pin (part# A018-1000) is a precision locating pin used in the CleanMax ZM-700 commercial battery upright to align and register two mating parts to each other. A dowel pin holds alignment that screws alone cannot, so the parts it joins seat in exactly the right position every time.
Compatible Models for the ZM-700 Dowel Pin
This is a genuine Tacony OEM part for the CleanMax ZM-700 commercial battery upright. Call 763-535-0770 if you are unsure which model or configuration you have and we will confirm the correct part.
What the ZM-700 Dowel Pin does
The dowel pin fits into matching holes in two components so they locate precisely and cannot shift relative to each other under load or vibration. In a vacuum assembly that means the parts it registers stay aligned so bearings, covers, or housings seat correctly and wear evenly. It carries shear load and locating duty rather than clamping (that is the screws’ job). A genuine pin is the correct diameter and length for a proper press or slip fit.
Signs the ZM-700 Dowel Pin needs replacing
Replace the dowel pin if it is bent, worn undersize, or lost, or if the parts it locates have become loose, misaligned, or are wearing unevenly. If a reassembled section will not line up or rattles despite tight fasteners, a missing or worn dowel pin is a common cause.
Installation and fit
Power down the machine. During reassembly, seat the new dowel pin fully into its locating hole so the mating parts register on it before the fasteners are tightened; confirm the parts align with no play. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Dowel Pin do on the CleanMax ZM-700?
It is a precision locating pin that aligns and registers two mating parts so they seat in exactly the right position and cannot shift under load or vibration.
How do I know if my ZM-700 Dowel Pin needs replacing?
Replace it if it is bent, worn undersize, or lost, or if the parts it locates have become loose or misaligned despite tight fasteners.
What models is the Dowel Pin (part# A018-1000) compatible with?
It is the genuine dowel pin for the CleanMax ZM-700 commercial battery upright. Call 763-535-0770 to confirm fit for your machine.
How do I order the Dowel Pin (part# A018-1000) or get help?
You can add the Dowel Pin (part# A018-1000) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
