CleanMax CM-WAV 1/4-20 x 1/2 in Screw 15162

The CleanMax CM-WAV 1/4-20 x 1/2 in Screw (part# 15162) is a 1/4-20 x 1/2-inch machine screw carried under its own Tacony part number for its position on the CM-WAV wide-area vacuum, fastening a 1/4-inch-thread structural joint.

Compatible Models for the 1/4-20 x 1/2 in Screw

• CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)

This is a genuine Tacony hardware item used on the CleanMax CM-WAV. The same size fastener may appear elsewhere on the machine and on other Tacony models; call 763-535-0770 to confirm the exact part and its position on your machine.

What the 1/4-20 x 1/2 in Screw does

This is one of the 1/4-20 x 1/2-inch screws the CM-WAV uses at its structural joints; it is listed separately (part# 15162) for the specific location it occupies on the diagram. Like the machine’s other 1/4-20 fasteners it provides a strong, coarse-thread clamp where a bracket, cover, or support bolts to the body and the joint must hold under working loads.

Signs the 1/4-20 x 1/2 in Screw needs replacing

Replace this screw when its thread is stripped, its head or drive is damaged, or it is corroded so it will not tighten and hold. Ordering by the 15162 part number keeps you matched to its diagram position; if you are unsure which of the machine’s 1/4-20 screws you need, check the position on the parts diagram or call us.

Installation and fit

Thread the new 15162 screw straight into its hole to avoid cross-threading and torque it to secure the joint. Return it to its own position rather than mixing it with other-length 1/4-20 screws elsewhere on the machine. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the 1/4-20 x 1/2 in Screw (15162) do on the CleanMax CM-WAV?

It is a 1/4-20 coarse-thread structural screw for a specific joint on the machine, listed under part# 15162 for that diagram position.

How is 15162 different from the other CM-WAV 1/4-20 x 1/2 screws?

It is the same 1/4-20 x 1/2-inch size but carries its own Tacony part number for the position it occupies on the diagram. Order by the part number shown for your location, or call us to confirm.

What models is the 1/4-20 x 1/2 in Screw (part# 15162) compatible with?

The 1/4-20 x 1/2 in Screw (part# 15162) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the 1/4-20 x 1/2 in Screw (part# 15162) or get help?

You can add the 1/4-20 x 1/2 in Screw (part# 15162) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.