CleanMax CM-WAV Cam Lever Handle Metal Stud 33104
Genuine Tacony CleanMax CM-WAV cam-lever metal stud (part# 33104) — the threaded post the handle-lock cam clamps against. Fits the CleanMax CM-WAV. In stock, Crystal MN. Call 763-535-0770.
The CleanMax CM-WAV Cam Lever Handle Metal Stud (part# 33104) is the threaded metal stud in the cam-lever handle lock of the CM-WAV wide-area vacuum, the stud the cam clamps against to hold the handle.
Compatible Models for the Cam Lever Metal Stud
- CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)
What the Cam Lever Metal Stud does
The metal stud is the fixed threaded post the cam-lever mechanism tightens against. When the lever is thrown, the cam draws against this stud to clamp the handle joint solid; releasing the lever frees it. Because it takes the full clamping load of the handle lock, it is made of metal to resist the wear and thread damage a plastic part could not survive in commercial use.
Signs the Cam Lever Metal Stud needs replacing
Replace the metal stud if its threads are stripped or galled, if it is bent, or if it is worn where the cam bears so the handle lock no longer clamps tight. A handle that will not lock firmly even after fitting a new cam washer or pin can point to a worn or stripped stud as the remaining cause.
Installation and fit
Remove the old stud from the handle joint, thread or press the new 33104 stud into position per the diagram, and reassemble the cam-lever parts around it. Confirm the lever clamps the handle solid before use. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Cam Lever Metal Stud do on the CleanMax CM-WAV?
It is the threaded metal post the cam clamps against to lock the handle; throwing the lever draws the cam against the stud to hold the handle joint solid.
How do I know if my CM-WAV cam lever stud needs replacing?
Replace it if the threads are stripped or galled, it is bent, or it is worn where the cam bears so the handle lock will not clamp tight even with a fresh cam washer and pin.
What models is the Cam Lever Metal Stud (part# 33104) compatible with?
The Cam Lever Metal Stud (part# 33104) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.
How do I order the Cam Lever Metal Stud (part# 33104) or get help?
You can add the Cam Lever Metal Stud (part# 33104) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
