CleanMax Nitro CMNR-QD Extension Cord 40 ft C283-0112
$60.99
Genuine CleanMax 40-foot extension cord (part# C283-0112) for the Nitro CMNR-QD commercial upright. In stock, ships from Crystal, MN. Call 763-535-0770.
The Nitro CMNR-QD Extension Cord (part# C283-0112) is the genuine 40-foot power cord that gives the CleanMax Nitro commercial upright its long, uninterrupted cleaning reach. At forty feet it lets an operator cover a wide floor plate area from a single wall outlet, which is exactly why commercial crews wear a power cord out faster than any other part on the machine.
Compatible Models for the Nitro CMNR-QD Extension Cord
This is a genuine Tacony OEM part built for the CleanMax Nitro CMNR-QD. CleanMax shares many components across its commercial upright range, so if you run a related CleanMax commercial model, call 763-535-0770 and we will confirm fit before you order.
What the Nitro CMNR-QD Extension Cord does
The extension cord carries line voltage from the wall receptacle to the vacuum motor and delivers the full amperage the Nitro draws under load. The 40-foot length is chosen so a cleaner can work across an open commercial space without constantly hunting for a new outlet, cutting the stop-start time that kills productivity on a large floor. Genuine cord uses the correct gauge and jacket rating for a commercial vacuum, so it stays flexible in cold buildings and resists the abrasion of being dragged across concrete, tile, and door thresholds shift after shift.
Signs the Nitro CMNR-QD Extension Cord needs replacing
Replace the cord when you see cracked or split jacket insulation, exposed copper strands, scorching or melting near the plug, or bent and loose prongs. Intermittent power — the vacuum cutting out when the cord is flexed at a particular spot — means a broken conductor inside the jacket and is a fire and shock hazard, not a nuisance. Any cord that has been run over and crushed, taped over a cut, or that trips a GFCI should be taken out of service and replaced rather than repaired.
Installation and fit
Unplug the machine before servicing. Route the new 40-foot cord through the strain relief and cord hook exactly as the original so the connection is not pulled loose, and never remove or defeat the ground pin. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Extension Cord do on the CleanMax Nitro CMNR-QD?
It supplies power from the wall outlet to the vacuum motor. The 40-foot length lets the operator clean a large commercial floor area from one receptacle without repeatedly unplugging and moving.
How do I know if my Nitro CMNR-QD Extension Cord needs replacing?
Look for cracked or cut jacket, exposed wires, scorch marks or melting at the plug, bent prongs, or the vacuum cutting in and out when the cord is flexed. Any of these means the cord is unsafe and should be replaced immediately.
What models is the Extension Cord (part# C283-0112) compatible with?
It is the genuine 40-foot cord for the CleanMax Nitro CMNR-QD commercial upright. Other CleanMax commercial uprights use similar cords — call 763-535-0770 to confirm the correct cord for your exact model.
How do I order the Extension Cord (part# C283-0112) or get help?
You can add the Extension Cord (part# C283-0112) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
