Hall Sensor Board Kit B228-0120K

The Hall Sensor Board Kit (part# B228-0120K) is the genuine Tacony OEM control board that reads the brushroll’s Hall-effect rotation signal on the CleanMax CMPS-QDZ Pro Series, driving the brushroll status indication and jam protection.

Compatible Models for the Hall Sensor Board Kit

• CleanMax: CMPS-QDZ Pro Series Upright

Not sure if this fits your machine? Call us at 763-535-0770 and we will confirm compatibility for you.

The board interprets the signal from the brushroll’s Hall sensor and controls how the machine responds — indicating a running brushroll and warning or shutting the agitator down on a jam or broken belt. When the board fails, the machine can show a false brushroll fault or lose its rotation indication.

Replace the board kit when the machine reports a brushroll error that a good belt, clear roll and working idler sensor do not explain, so the rotation-sensing system reads and responds correctly again.

Twin City Vacuum has been selling and servicing CleanMax and Tacony floor-care equipment since 1956 and sources every part directly from Tacony.

Frequently Asked Questions

What does the B228-0120K Hall sensor board do?

It is the control board that reads the brushroll’s Hall-effect rotation signal and drives the brushroll status indication and jam/broken-belt protection on the CMPS-QDZ.

How is the board different from the idler sensor?

The B228-0120K board interprets the signal, while the Hall sensor idler assembly (D375-1400) generates it at the brushroll; a fault can be in either, so both are worth checking.

Why does the kit include more than just a board?

It is supplied as a kit with the board and the hardware needed to install it, so you have the pieces to replace the control board as a unit.

How do I order the CleanMax CMPS-QDZ Hall Sensor Board Kit (part# B228-0120K) or get help?

You can add the Hall Sensor Board Kit (part# B228-0120K) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.