Baseplate Screw B220-0414

The Baseplate Cover Screw (part# B220-0414) is a genuine Tacony OEM replacement part compatible with 21 models from 4 Tacony brands (Tornado, Riccar, Simplicity and CleanMax). The B220-0414 is a shared Tacony part fitted to Tornado, Riccar, Simplicity and CleanMax models — see the full Compatible Models list below.

On the Tornado Roam (Model 97300 / 97300C), the baseplate is the flat plate on the bottom of the cleaning head. Several of these screws hold it flush against the nozzle body so the vacuum keeps consistent suction across the full width of the brushroll and so the base does not rattle loose as the machine is pushed across carpet. Because they thread into the plastic nozzle housing and are backed out every time the brushroll or belt is serviced, part# B220-0414 is a common wear-and-loss item on high-use machines.

Compatible Models for the Baseplate Cover Screw

Part# B220-0414 is a genuine Tacony component shared across multiple brands. This part is confirmed to fit the following models:

• Tornado: Roam 97300, TV280, Roam 97300C
• Riccar: R10CV, R10D, R10P, R10S, R10SAND, R17, R50TAP, PRIMAP
• Simplicity: S10CV, S10D, S10P, S10S, S10SAND, SC10CV, WONDERP
• CleanMax: Zoom ZM-500, Zoom ZM-700, Zoom ZM-800

Part# B220-0414 is a shared Tacony fastener used across the broader Tacony commercial upright line in addition to the Tornado Roam. If you are matching this screw to a different machine, call us and we will confirm the fit before you order.

Replace the baseplate cover screw if it is stripped, cross-threaded, rusted, or missing — a situation that most often shows up after the baseplate has been removed for a belt or brushroll change. Tell-tale signs include a baseplate that no longer sits flush, a rattling or vibrating cleaning head, or a screw that spins freely without tightening. A missing or loose screw lets the baseplate flex under load, which can cause suction loss along one edge of the nozzle and premature wear on the belt.

Installation is straightforward: seat the baseplate evenly, start each screw by hand to avoid cross-threading the plastic boss, then snug them in a cross pattern so the plate seats flat. Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the full Tornado Roam 97300 / 97300C parts catalog for the matching baseplate, brushroll, and belt, or view the official machine details at tornadovac.com.

Frequently Asked Questions

What does the baseplate screw secure?

The baseplate screw (part# B220-0414) fastens the baseplate (the bottom cover of the nozzle) to the cleaning-head housing, holding the sole plate that you remove to service the belt and brushroll. Because it is backed out during every belt or brush job, it sees a lot of use.

Is the baseplate screw a common wear-and-loss item?

Yes — since it is removed and refitted every time the baseplate comes off for service, it is easy to strip or lose, so a fresh B220-0414 is cheap insurance during a brushroll job. Keeping a spare avoids a stalled reassembly.

Is this the same as the M4 housing screw?

No — the baseplate screw (B220-0414) is a distinct fastener sized for the sole plate, separate from the general M4 x 12 housing screw (A732-2500). Match B220-0414 to the baseplate so it seats and holds correctly.

Which machines use the baseplate screw (part# B220-0414)?

It is a shared Tacony fastener that fits the Tornado Roam 97300 and 97300C along with the Riccar, Simplicity and CleanMax uprights built on the same platform — see the Compatible Models list above.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.