CleanMax CM-WAV 1/4-20 x 1/2 in Screw 00086
$2.99
Genuine Tacony CleanMax CM-WAV 1/4-20 x 1/2-inch screw (part# 00086) — coarse-thread structural fastener. Fits the CleanMax CM-WAV. In stock, Crystal MN. Call 763-535-0770.
The CleanMax CM-WAV 1/4-20 x 1/2 in Screw (part# 00086) is a 1/4-20 coarse-thread machine screw, 1/2 inch long, used on the CM-WAV wide-area vacuum to fasten a structural joint that needs the strength of a 1/4-inch bolt.
Compatible Models for the 1/4-20 x 1/2 in Screw
- CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)
This is a genuine Tacony hardware item used on the CleanMax CM-WAV. The same size fastener may appear elsewhere on the machine and on other Tacony models; call 763-535-0770 to confirm the exact part and its position on your machine.
What the 1/4-20 x 1/2 in Screw does
The 1/4-20 thread is the largest common fastener size on the CM-WAV, so this screw appears where a joint carries real load — mounting brackets, the shoe, motor supports, and similar structural connections. At 1/2 inch long it suits joints where the parts being clamped are shallow. Its coarse 1/4-20 thread gives a strong, forgiving grip in metal or a threaded boss.
Signs the 1/4-20 x 1/2 in Screw needs replacing
Replace this screw if its threads are stripped or galled, the drive recess is chewed so it cannot be torqued, or it is bent or corroded. A 1/4-20 screw that spins without drawing the joint tight has lost its thread and should be renewed; because these secure load-bearing joints, do not run the machine with one missing.
Installation and fit
Start the new 00086 screw squarely into its threaded hole or nut to avoid cross-threading the coarse thread, and torque it to clamp the joint firmly. If several 1/4-20 x 1/2 in screws are used nearby, keep them with their correct positions per the diagram. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the 1/4-20 x 1/2 in Screw do on the CleanMax CM-WAV?
It is a 1/4-inch coarse-thread structural screw that fastens load-bearing joints such as brackets, the shoe, or motor supports where a strong 1/2-inch-long fastener is needed.
How do I know if my CM-WAV 1/4-20 screw needs replacing?
Replace it if the threads are stripped, the drive recess is chewed, or it is bent or corroded so it will not draw the joint tight. Do not leave a structural joint short a screw.
What models is the 1/4-20 x 1/2 in Screw (part# 00086) compatible with?
The 1/4-20 x 1/2 in Screw (part# 00086) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.
How do I order the 1/4-20 x 1/2 in Screw (part# 00086) or get help?
You can add the 1/4-20 x 1/2 in Screw (part# 00086) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
