CleanMax ZM-800 Cradle for Isolator Switch B223-2914
$2.99
Genuine CleanMax ZM-800 cradle for the isolator switch (part# B223-2914). Holds the rocker isolator switch on ZM-800.6 in a set serial range. Call 763-535-0770.
The ZM-800 Cradle for Isolator Switch (part# B223-2914) is the molded mount that holds and locates the winged rocker isolator switch (A328-0900) on the CleanMax ZM-800.6 commercial battery upright, within serial number range 0518003442 to 0120007894. It is the housing that keeps the master power switch fixed and correctly positioned in the body.
Compatible Models for the ZM-800 Isolator Switch Cradle
This is a genuine Tacony OEM part for the CleanMax ZM-800 commercial battery upright. This cradle is used with the ZM-800.6 isolator switch (part# A328-0900) only, within serial range 0518003442 to 0120007894. If you are unsure which CleanMax model or serial range you have, call 763-535-0770 and we will confirm the correct part before you order.
What the ZM-800 Isolator Switch Cradle does
The cradle captures the isolator switch and mounts it solidly to the machine so the switch does not move, twist, or pull on its wiring when the operator actuates it. On a switch that carries the full battery load, a firm mount matters: movement stresses the terminals and can cause intermittent contact. The cradle also positions the winged rocker where the operator expects it and protects the switch body from being knocked. It is matched to the ZM-800.6 isolator and serial range.
Signs the ZM-800 Isolator Switch Cradle needs replacing
Replace the cradle if it is cracked or broken so the switch is loose in the body, if the mounting tabs or screw bosses have failed, or if the switch wobbles or pulls on its wiring because the cradle no longer holds it. A switch that has come loose in its opening usually means the cradle, not the switch, has failed.
Installation and fit
Power down and isolate the battery. Remove the isolator switch from the old cradle, mount the new cradle in the same position and orientation, seat the switch into it firmly, and confirm the switch is held solid with no movement and no strain on its leads. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Cradle for Isolator Switch do on the CleanMax ZM-800?
It is the molded mount that holds the winged rocker isolator switch (A328-0900) solidly in the ZM-800.6 body so the switch stays fixed and does not stress its wiring when actuated.
How do I know if my ZM-800 Isolator Switch Cradle needs replacing?
Replace it if it is cracked or its mounting tabs are broken so the switch is loose or wobbles in the body. A switch that has come loose in its opening usually means the cradle has failed.
What models is the Cradle for Isolator Switch (part# B223-2914) compatible with?
It is used with the ZM-800.6 isolator switch within serial range 0518003442 to 0120007894. Call 763-535-0770 with your serial number to confirm.
How do I order the Cradle for Isolator Switch (part# B223-2914) or get help?
You can add the Cradle for Isolator Switch (part# B223-2914) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
