CleanMax CM-WAV Vac Cover 30080
$89.99
Genuine Tacony CleanMax CM-WAV vac cover (part# 30080) — the molded cover that seals the suction-motor compartment and directs exhaust to the filter. Fits the CleanMax CM-WAV. In stock, Crystal MN. Call 763-535-0770.
The CleanMax CM-WAV Vac Cover (part# 30080) is the molded cover that closes over the suction motor compartment on the CM-WAV wide-area vacuum, sealing the motor airway and protecting the motor from debris while directing exhaust air toward the filter.
Compatible Models for the Vac Cover
- CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)
What the Vac Cover does
The vac cover completes the sealed path over the suction motor. It clamps down against the chassis and motor gasket so the air the motor pulls is routed through the filtration rather than leaking around the motor, and it shields the motor and wiring from grit kicked up during use. A properly seated cover is part of what lets the CM-WAV hold suction across its wide head.
Signs the Vac Cover needs replacing
Replace the vac cover if it is cracked, warped, or no longer clamps down flat, or if its edges or tabs are broken so it will not stay seated. Symptoms include a whistling air leak from the motor area, reduced suction that clean filters do not restore, or a cover that rattles loose in use. A distorted cover that will not seal against the gasket should be renewed rather than forced.
Installation and fit
Lift the old cover off after releasing its fasteners or clips, transfer any seal, and seat the new cover squarely so it clamps evenly against the motor gasket. Confirm there are no gaps around the perimeter before running the machine. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Vac Cover do on the CleanMax CM-WAV?
It closes and seals the suction-motor compartment, routing exhaust air to the filter and protecting the motor from debris. It is part of the sealed airway that lets the machine hold suction.
How do I know if my CM-WAV vac cover needs replacing?
Replace it if it is cracked or warped, will not seat flat, or leaks air around the motor so suction drops even with clean filters. A cover with broken tabs that will not stay clamped should be renewed.
What models is the Vac Cover (part# 30080) compatible with?
The Vac Cover (part# 30080) fits the CleanMax CM-WAV wide-area commercial upright vacuum. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.
How do I order the Vac Cover (part# 30080) or get help?
You can add the Vac Cover (part# 30080) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
