50 ft 16/3 Power Cord CMPS-50C

The 50 ft 16/3 Power Cord (part# CMPS-50C) is a genuine Tacony OEM commercial-length power cord that gives an operator a full 50 feet of reach from a single outlet — a practical necessity in hallways, ballrooms, and open floor plans. Its 16-gauge three-wire (16/3) construction carries the motor’s current safely over that distance.

The cord is heavy-jacketed 16/3 SJT wire with a grounded plug and a molded strain relief where it enters the machine. Because it is dragged, pinched in doorways, and run over daily, it fails at predictable spots: nicks and cuts in the jacket, a cracked plug, or intermittent power when the cord is flexed near the strain relief. A damaged cord is a shock and fire hazard and should be replaced right away, not taped.

Compatible Models

This part is a genuine Tacony OEM component shared across multiple brands and models:

• Tornado: CK 14/1 BSE (Model 98145), CK 14/1 Pro (Model 98147), CK 14/2 Pro (Model 98152)
• CleanMax: CMPS-QDZ

Not sure if this fits your machine? Call us at 763-535-0770 and we will confirm compatibility for you.

Replace the Power Cord immediately if you see any cut, nick, or exposed conductor in the jacket, if the plug is cracked or scorched, or if power cuts out when the cord is moved near the machine. Because it wires directly to the switch and motor, fitting it safely is best done by a technician — our service team handles this routinely.

Twin City Vacuum has been selling and servicing Tacony equipment since 1956. Browse more Tornado cleaning equipment parts, or visit Tornado and CleanMax.

Frequently Asked Questions

What length and gauge is the Power Cord (part# CMPS-50C)?

It is a 50-foot, 16-gauge three-wire (16/3) grounded cord built for commercial reach and the current the machine’s motor draws.

My cord is nicked but still works — do I need to replace it?

Yes. Any cut, nick, or exposed conductor is a shock and fire hazard. Replace the cord rather than taping it, even if the vacuum still runs.

What models does the Power Cord (part# CMPS-50C) fit?

It fits the Tornado CK 14/1 BSE (98145), CK 14/1 Pro (98147) and CK 14/2 Pro (98152), and the CleanMax model coded CMPS-QDZ.

How do I order the Power Cord (part# CMPS-50C) or get help?

You can add the Power Cord (part# CMPS-50C) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing this equipment since 1956 and can help confirm the right part for your machine.