Actuator Check Card 49720008
$176.99
Genuine OEM actuator check card (part# 49720008) for the Tornado BDSO 27/28. It is the board that drives and monitors the machine’s actuators.
Genuine OEM actuator check card (part# 49720008) for the Tornado BDSO 27/28 stand-on scrubber. It is the board that drives the machine’s linear actuators — the brush deck lift and the squeegee lift — and monitors them while they run.
Driving an actuator is more than switching a motor on. The card has to reverse polarity to change direction, and it has to know when to stop: at the end of travel, or when the actuator meets more resistance than it should. That monitoring is the protection that stops a jammed deck burning out an expensive actuator, and it is why the card is worth understanding before it is replaced on suspicion.
Symptoms that point here include an actuator that will not move in one direction but works in the other, both actuators failing at once (which a single card can cause and two separate actuators almost never do), or an actuator that runs and then stops short every time.
Before condemning it, check the actuator itself and what it works against. An actuator fighting a seized pivot or a bent linkage draws high current, and the card will shut it down — behaviour that looks exactly like a card fault but is the protection doing its job correctly. Check the connectors too: these sit in a wet environment and corrode, which gives intermittent operation.
This card lives behind the panel on a machine that is hosed down. Keeping covers and seals intact does more for its life than anything else.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the electrical layout drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the actuator check card (part# 49720008) do?
It drives the machine’s linear actuators — the brush deck and squeegee lifts — reversing polarity to change direction and monitoring them so a jam does not burn out an actuator.
My actuator stops short every time. Is the card faulty?
Not necessarily — it may be the protection working correctly. An actuator fighting a seized pivot or bent linkage draws high current, and the card shuts it down. Check the mechanism and the connectors before condemning the board.
Both my actuators stopped working at once. What does that suggest?
A single card can cause that; two separate actuators failing simultaneously almost never do. It is one of the few symptoms that genuinely points at this board.
How do I order the Actuator Check Card (part# 49720008) or get help?
You can add the Actuator Check Card (part# 49720008) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the actuator check card (part# 49720008) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet