Agitator Pulley, Clamping Design B013-1400
$8.99
Genuine OEM agitator pulley, clamping design (part# B013-1400), the clamping agitator drive pulley on Simplicity, Riccar and CleanMax ultra-lightweight uprights, including the Simplicity S10. Not sure it fits your model? Call us at 763-535-0770.
The Agitator Pulley, Clamping Design B013-1400 is the clamping drive pulley that fits on the end of the steel agitator and takes the drive belt on ultra-lightweight commercial uprights. It fits Simplicity, Riccar and CleanMax vacuums, including the Simplicity S10 and its Riccar R10 SupraLite twins. The clamping design locks onto the agitator shaft so the pulley cannot slip as the belt drives it.
Compatible Models
- Simplicity: F3700, F3700.SAND, F3700C, S10P, S10SAND, WONDERP.TAP
- Riccar: PRIMAP.TAP, R10P, R10SAND, R17, R50TAP, RSL5, RSL5.SAND, RSL5C
- CleanMax: ZM-700
One part number fits every model listed above, whichever brand is on the machine. If your model is not shown, call us at 763-535-0770 with the model number from the label on your vacuum and we will help you find the right part.
When to Replace the Agitator Pulley, Clamping Design
Replace the pulley if it is cracked, the belt slips or jumps off, the agitator turns slowly under load, or you hear clicking from the end of the agitator.
Tips and Ordering
Check the belt when you change the pulley; a stretched or glazed belt will slip on a new pulley too. See where it fits on our Simplicity S10 parts diagrams or browse the Simplicity parts index. Twin City Vacuum in Crystal, Minnesota has sold and serviced vacuums since 1956, and our repair shop can fit the part for you.
Frequently Asked Questions
What does the Agitator Pulley, Clamping Design (B013-1400) do?
It is the clamping drive pulley that fits on the end of the steel agitator and takes the drive belt on ultra-lightweight commercial uprights. The clamping design locks onto the agitator shaft so the pulley cannot slip as the belt drives it.
How do I know the Agitator Pulley, Clamping Design needs replacing?
Replace the pulley if it is cracked, the belt slips or jumps off, the agitator turns slowly under load, or you hear clicking from the end of the agitator.
Which vacuums does the Agitator Pulley, Clamping Design (part# B013-1400) fit?
It fits Simplicity, Riccar and CleanMax vacuums, including the Simplicity F3700, F3700.SAND, F3700C, S10P; the Riccar PRIMAP.TAP, R10P, R10SAND, R17; the CleanMax ZM-700. Every model is listed in the Compatible Models section on this page.
How do I order the Agitator Pulley, Clamping Design (part# B013-1400) or get help?
You can add the Agitator Pulley, Clamping Design (part# B013-1400) to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing vacuums since 1956 and can help you find the right part for your machine.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.






Reviews
There are no reviews yet