Find genuine Simplicity S10 replacement parts for Models S10S, S10D, S10P, S10SAND, S10E, S10CV, S10CV.2, S10CV.4, S10CV.6 and S10CV.8. Can’t find your part? Call us at 763-535-0770.
The Simplicity S10 is the ultra-lightweight commercial-style upright family: the S10S, S10D, S10P and S10SAND corded uprights with the hard-shell bag housing, the S10E with its cloth outer bag, and the cordless S10CV models (S10CV, S10CV.2, S10CV.4, S10CV.6 and S10CV.8). Riccar builds the same machines as the Riccar SupraLite R10 family, so most of the parts on this page also fit the matching Riccar R10S, R10D, R10P, R10SAND, R10E and R10CV models. Each part’s own page lists every Simplicity, Riccar and other model it fits.
Which S10 do I have? The model number is printed on the label on the back of the vacuum. Pick the section below that names your model: the drawings are shared where the machines are the same, and where one part differs between models, the table shows both part numbers with the model each one fits.
- Handle and Body (S10S, S10D, S10P, S10SAND)
- Nozzle (S10S, S10D)
- Nozzle (S10P, S10SAND)
- Agitator (S10D, S10P, S10SAND)
- Handle and Cloth Bag (S10E)
- Nozzle (S10E)
- Cordless Nozzle (S10CV, S10CV.2, S10CV.4, S10CV.6, S10CV.8)
- Cordless Handle and Main Body (S10CV, S10CV.2)
- Cordless Handle and Main Body (S10CV.4, S10CV.6, S10CV.8)
- Steel Agitator (S10CV.4, S10CV.6, S10CV.8)
Click a red dot on a diagram, or a part in the table below it, to open that part in a new tab.
Handle and Body Parts (S10S, S10D, S10P, S10SAND)
This diagram covers the handle and body of the Simplicity S10S, S10D, S10P and S10SAND.
Riccar fit: 29 of the 32 parts in this section also fit the Riccar SupraLite R10S, R10D, R10P and R10SAND.
1. Handle Grip Assembly – C220-35142. Screw, #8-18 x 5/8 in. – A732-83142. Screw, #8-18 x 5/8 in. – A732-83142. Screw, #8-18 x 5/8 in. – A732-83142. Screw, #8-18 x 5/8 in. – A732-83143. Strain Relief – B333-3014B4. Two Speed Switch – A328-17005. Screw #8 x 7/16 Hi-Lo – A732-84146. Nylon Washer – B017-25007. Handle Tube – B220-34008. Handle Back Cover – B220-31149. Screw #10-32 x 1-5/8 – A432-07059. Screw #10-32 x 1-5/8 – A432-070510. Washer – A430-040511. Swivel Cord Hook – B220-331412. Upper Cord Hook Spring – B430-020013. Neck Coupling Back – B220-111414. Two-Speed Handle Wire Harness (S10S, S10D) or Handle Wire Harness for Hall Sensor Models (S10P, S10SAND) – A434-4043/A434-414314. Two-Speed Handle Wire Harness (S10S, S10D) or Handle Wire Harness for Hall Sensor Models (S10P, S10SAND) – A434-4043/A434-414315. Hex Lock Nut – 3035815. Hex Lock Nut – 3035816. Neck Coupling Front Black – C220-101417. Handle Duct – B220-3014C18. Bag Mount Assembly – D484-228219. Bag Mount Seal – B220-390020. Simplicity Hard Shell Bag (S10S, S10D) or Outer Hard Shell Bag (S10P, S10SAND) – D220-5400/D220-510021. Type L HEPA Media Bag (Single) or Charcoal-Lined HEPA Media Bag (Single) or Simplicity Type L HEPA Media Bags (6-Pack) or Simplicity Charcoal-Lined Type L HEPA Media Bags (6-Pack) – B220-5382C/B220-5382D/SLH-6/SLHC-621. Type L HEPA Media Bag (Single) or Charcoal-Lined HEPA Media Bag (Single) or Simplicity Type L HEPA Media Bags (6-Pack) or Simplicity Charcoal-Lined Type L HEPA Media Bags (6-Pack) – B220-5382C/B220-5382D/SLH-6/SLHC-622. 35-Foot Power Cord Assembly (S10S, S10D) or 40-Foot Power Cord Assembly (S10P, S10SAND) – D434-4243/D434-434323. Polyurethane Handle Spacer – B388-590024. Carry Handle – B220-621425. Handle Assembly (S10S, S10D) or Handle Assembly with 40-Foot Cord (S10P, S10SAND) – D220-3100/D220-3300Nozzle Parts (S10S, S10D)
This diagram covers the nozzle of the Simplicity S10S and S10D.
Riccar fit: 39 of the 45 parts in this section also fit the Riccar SupraLite R10S and R10D.
1. Lime Metallic Nozzle Cover (S10S) or Raspberry Metallic Nozzle Cover (S10D) – B220-23B2/B220-23362. Furniture Guard – B220-26143. Simplicity Headlamp Lens – B018-0315C4. Direct Air Motor Assembly, Flat Belt – D220-40005. Motor Fan – B220-43146. Pivot Bushing – B220-44146. Pivot Bushing – B220-44147. Motor Inlet Seal – B480-45148. Flat Belt (2-Pack) or Flat Brushroll Belt – SBF-2/B014-0814B9. Basetray Assembly – D220-011410. Upright Stop Spring – B220-090011. Upright Stop Pedal – B220-071412. Upright Stop Pedal Pivot – B220-080013. Upright Stop Pedal Assembly – D220-071414. Axle Clamp – 54.13615. Inlet Duct Cover – B220-021418. PC Board Kit – B317-0000K19. Large Wheel Axle – B010-2800C20. Rear Wheel – C220-0531C20. Rear Wheel – C220-0531C21. Front Wheel with Bushing and Axle – D010-263123. Screw, #8-18 x 5/8 in. – A732-831423. Screw, #8-18 x 5/8 in. – A732-831423. Screw, #8-18 x 5/8 in. – A732-831424. Baseplate Assembly or Soft Carpet Baseplate Assembly – D220-0414/D220-141425. Baseplate Cover – BPC26. Squeegee or Soft Carpet Baseplate Squeegee – B015-3000B/B015-320027. Baseplate Screw – B220-041428. Base Plate Axle – B370-1700B29. Base Plate Wheel – B370-184329. Base Plate Wheel – B370-184330. Light Socket – A018-090031. Light Bulb Krypton 12 Volt – A350-0000B32. Wooden Brushroll Agitator (S10S) or Metal Agitator for Flat Belt (S10D) – D012-2800/D220-020033. Scroll Housing Right – B220-401434. Scroll Housing Left – B220-411435. Basetray Plug – B016-191437. Strain Relief Washer – B034-010038. Combination Screw M4 x 12 – A732-250039. Handle Bolt Nut – A432-060540. Fan Washer – A733-220041. Washer Under Fan – A733-330042. Felt Pivot Seal – B220-450043. E Clip for Motor Shaft – A732-300044. Circuit Breaker – A028-0114BNozzle Parts (S10P, S10SAND)
This diagram covers the nozzle of the Simplicity S10P and S10SAND.
Riccar fit: 38 of the 43 parts in this section also fit the Riccar SupraLite R10P and R10SAND.
1. Simplicity Nozzle Cover (S10P) – D017-22142. Furniture Guard – B220-26143. Simplicity Headlamp Lens – B018-0315C4. Motor Assembly with Lifetime Belt – D220-41005. Motor Fan – B220-43146. Pivot Bushing – B220-44146. Pivot Bushing – B220-44147. Motor Inlet Seal – B480-45148. Lifetime Belt – B014-12009. Basetray Assembly – D220-011410. Upright Stop Spring – B220-090011. Upright Stop Pedal – B220-071412. Upright Stop Pedal Pivot – B220-080013. Upright Stop Pedal Assembly – D220-071414. Axle Clamp – 54.13615. Inlet Duct Cover – B220-021416. Hall Sensor Idler Assembly – D375-140017. Plastic Dowel Pin – A018-130018. PC Board – B317-1000K19. Large Wheel Axle – B010-2800C20. Rear Wheel – C220-0531C20. Rear Wheel – C220-0531C21. Front Wheel with Bushing and Axle – D010-263122. Screw #8 x 7/16 Hi-Lo – A732-841423. Screw, #8-18 x 5/8 in. – A732-831423. Screw, #8-18 x 5/8 in. – A732-831423. Screw, #8-18 x 5/8 in. – A732-831424. Baseplate Assembly or Soft Carpet Baseplate Assembly – D220-0414/D220-141425. Baseplate Cover – BPC26. Squeegee or Soft Carpet Baseplate Squeegee – B015-3000B/B015-320027. Baseplate Screw – B220-041428. Base Plate Axle – B370-1700B29. Base Plate Wheel – B370-184329. Base Plate Wheel – B370-184330. Light Socket – A018-090031. Light Bulb Krypton 12 Volt – A350-0000B32. Steel Agitator Assembly – D013-050033. Scroll Housing Right – B220-401434. Scroll Housing Left – B220-411436. Hole Plug – A018-141437. Strain Relief Washer – B034-010038. Combination Screw M4 x 12 – A732-250039. Handle Bolt Nut – A432-060540. Fan Washer – A733-220041. Washer Under Fan – A733-330042. Felt Pivot Seal – B220-4500Agitator Parts (S10D, S10P, S10SAND)
This diagram covers the agitator of the Simplicity S10D, S10P and S10SAND.
Riccar fit: 17 of the 17 parts in this section also fit the Riccar SupraLite R10D, R10P and R10SAND.
2. Metal End Cap – B013-16002. Metal End Cap – B013-16003. Screw Pulley End 80mm – A733-18104. Retainer Ring – B475-19004. Retainer Ring – B475-19005. Felt Seal – B375-39005. Felt Seal – B375-39006. Bearing – A735-02006. Bearing – A735-02007. Pulley Clamping Design for Flat Belt (S10D) or Agitator Pulley for Poly-V Belt C013-0800 (S10P, S10SAND) – B220-1200/B013-14008. Short Brush Strip or Short Brush Strip B013-1000 or Long Brush Strip B475-0400B – B013-1000/B013-0301B/B013-03008. Short Brush Strip or Short Brush Strip B013-1000 or Long Brush Strip B475-0400B – B013-1000/B013-0301B/B013-03009. Long Brush Strip or Long Brush Strip B475-0400B or Short Brush Strip B013-1000 – B475-0400B/B013-0401B/B013-04009. Long Brush Strip or Long Brush Strip B475-0400B or Short Brush Strip B013-1000 – B475-0400B/B013-0401B/B013-040010. Agitator Bearing Holder with Edge Brushes – B013-150011. Screw Non-Pulley End 40mm – A733-180012. Metal Agitator for Flat Belt (S10D) or Steel Agitator Assembly (S10P, S10SAND) – D220-0200/D013-0500| # | Image | Part Description | Part Number | Price |
|---|---|---|---|---|
| 1 | Agitator assembly (not sold as one part; order the individual parts below) | – | – | |
| 2 | ![]() | Metal End Cap | B013-1600 | $7.99 |
| 3 | ![]() | Screw Pulley End 80mm | A733-1810 | $2.99 |
| 4 | ![]() | Retainer Ring | B475-1900 | $2.99 |
| 5 | ![]() | Felt Seal | B375-3900 | $2.99 |
| 6 | ![]() | Bearing | A735-0200 | Call 763-535-0770 |
| 7 | ![]() | Pulley Clamping Design for Flat Belt (S10D) | B220-1200 | $4.99 |
| 8a | ![]() | Short Brush Strip | B013-1000 | $5.99 |
| 8b | ![]() | Short Brush Strip B013-1000 | B013-0301B | $4.99 |
| 8c | ![]() | Long Brush Strip B475-0400B | B013-0300 | $3.99 |
| 9a | ![]() | Long Brush Strip | B475-0400B | $4.99 |
| 9b | ![]() | Long Brush Strip B475-0400B | B013-0401B | $4.99 |
| 9c | ![]() | Short Brush Strip B013-1000 | B013-0400 | $3.99 |
| 10 | ![]() | Agitator Bearing Holder with Edge Brushes | B013-1500 | $10.99 |
| 11 | ![]() | Screw Non-Pulley End 40mm | A733-1800 | $5.98 |
| 12 | ![]() | Metal Agitator for Flat Belt (S10D) | D220-0200 | $88.99 |
| 7 | ![]() | Agitator Pulley for Poly-V Belt C013-0800 (S10P, S10SAND) | B013-1400 | $8.99 |
| 12 | ![]() | Steel Agitator Assembly (S10P, S10SAND) | D013-0500 | $79.99 |
Handle and Cloth Bag Parts (S10E)
This diagram covers the handle and cloth bag of the Simplicity S10E. The Simplicity F3300 uses this same handle and cloth-bag drawing, so the parts in this section fit the F3300 as well; each part page lists every model it fits.
Riccar fit: 18 of the 20 parts in this section also fit the Riccar SupraLite R10E.
1. Rubber Handle Grip – B431-23002. Handle Tube with Grip – D431-24063. Lower Handle Upper Fan Housing – D431-30144. Handle Tube Bracket – B431-2914E5. Screw #10-32 x 1-5/8 – A432-07055. Screw #10-32 x 1-5/8 – A432-07056. Screw, #8-18 x 5/8 in. – A732-83146. Screw, #8-18 x 5/8 in. – A732-83146. Screw, #8-18 x 5/8 in. – A732-83147. Metal Lower Cord Hook – B430-12057. Metal Lower Cord Hook – B430-12058. Hex Lock Nut – 303589. Bag Holder – B211-361410. Bag Collar Ring – B211-231411. Bag Collar Seal – B211-640012. Bag Holder Assembly – D211-361413. Outer Bag Upgrade Kit – D211-630014. Lower Bag Spring – B211-120415. Lower Bag Clip – B211-1014B16. Type F Paper Bag or Simplicity Type F Bags (6-Pack) or Type F HEPA Bag (Bulk) or Simplicity Type F HEPA Media Bags (6-Pack) – ULW-PLAIN.2/SF-6/THB-ULW/SFH-616. Type F Paper Bag or Simplicity Type F Bags (6-Pack) or Type F HEPA Bag (Bulk) or Simplicity Type F HEPA Media Bags (6-Pack) – ULW-PLAIN.2/SF-6/THB-ULW/SFH-617. Screw #5 Hi-Lo Self Threading – A732-9206| # | Image | Part Description | Part Number | Price |
|---|---|---|---|---|
| 1 | ![]() | Rubber Handle Grip | B431-2300 | $4.99 |
| 2 | ![]() | Handle Tube with Grip | D431-2406 | $22.99 |
| 3 | ![]() | Lower Handle Upper Fan Housing | D431-3014 | $30.99 |
| 4 | ![]() | Handle Tube Bracket | B431-2914E | $4.99 |
| 5 | ![]() | Screw #10-32 x 1-5/8 | A432-0705 | $2.99 |
| 6 | ![]() | Screw, #8-18 x 5/8 in. | A732-8314 | $3.28 |
| 7 | ![]() | Metal Lower Cord Hook | B430-1205 | $4.99 |
| 8 | ![]() | Hex Lock Nut | 30358 | $2.99 |
| 9 | ![]() | Bag Holder | B211-3614 | $3.99 |
| 10 | ![]() | Bag Collar Ring | B211-2314 | $3.99 |
| 11 | ![]() | Bag Collar Seal | B211-6400 | $2.99 |
| 12 | ![]() | Bag Holder Assembly | D211-3614 | $13.99 |
| 13 | ![]() | Outer Bag Upgrade Kit | D211-6300 | $47.99 |
| 14 | ![]() | Lower Bag Spring | B211-1204 | $2.99 |
| 15 | ![]() | Lower Bag Clip | B211-1014B | $4.99 |
| 16 | ![]() | Type F Paper Bag | ULW-PLAIN.2 | $3.99 |
| 16A | ![]() | Simplicity Type F Bags (6-Pack) | SF-6 | $14.99 |
| 16B | ![]() | Type F HEPA Bag (Bulk) | THB-ULW | $5.99 |
| 16C | ![]() | Simplicity Type F HEPA Media Bags (6-Pack) | SFH-6 | $21.99 |
| 17 | ![]() | Screw #5 Hi-Lo Self Threading | A732-9206 | $2.99 |
Nozzle Parts (S10E)
This diagram covers the nozzle of the Simplicity S10E.
Riccar fit: 35 of the 37 parts in this section also fit the Riccar SupraLite R10E.
1. Simplicity Headlamp Lens – B018-0315C2. Red Nozzle Housing – D017-28A63. On/Off Foot Button – B028-01144. Furniture Guard – B029-03145. Screw, #8-18 x 5/8 in. – A732-83145. Screw, #8-18 x 5/8 in. – A732-83145. Screw, #8-18 x 5/8 in. – A732-83145. Screw, #8-18 x 5/8 in. – A732-83145. Screw, #8-18 x 5/8 in. – A732-83146. Flat Brushroll Belt or Flat Belt 2-Pack – B014-0814B/ULW-B27. Straight Shaft Motor Assembly – D113-15008. Motor Fan – B123-3000B9. Light Bulb Krypton 12 Volt – A350-0000B10. Light Socket – A018-090011. Large Wheel Axle – B010-2800C11. Large Wheel Axle – B010-2800C12. Rear Wheel – B010-131412. Rear Wheel – B010-131413. Base Tray Assembly with Upright Stop – D016-111414. Base Tray Wheel Axle – B010-0001E14. Base Tray Wheel Axle – B010-0001E15. Base Tray Small Wheel – B010-061415. Base Tray Small Wheel – B010-061416. Wooden Brushroll Agitator – D012-280017. Brushroll End Caps – B012-291417. Brushroll End Caps – B012-291418. Base Tray Cover – B015-201419. 30-Foot Power Cord – A434-0314B20. Lower Fan Housing – B123-361421. Fan Duct Cover With Seal – D123-381422. Combination Screw M4 x 12 – A732-250023. Upright Stop – B016-123024. On/Off Foot Switch – A028-001425. Strain Relief Washer – B034-010026. Circuit Breaker – A028-0114B27. Yellow Lead Wire – B433-034128. Zip Tie – A732-010029. Wire Connector – B123-010030. Wire Connector Large – B123-270032. Basetray Plug – B016-191433. E Clip for Motor Shaft – A732-300034. Behind Fan Washer for Ametek Direct-Air Motor ULW or Washer Under Fan – A732-9305/A733-330035. Fan Washer – A733-220036. Motor Seal Kit – C121-0000Cordless Nozzle Parts (S10CV, S10CV.2, S10CV.4, S10CV.6, S10CV.8)
This diagram covers the cordless nozzle of the Simplicity S10CV, S10CV.2, S10CV.4, S10CV.6 and S10CV.8.
Riccar fit: 42 of the 46 parts in this section also fit the Riccar SupraLite R10CV, R10CV.2, R10CV.4, R10CV.6 and R10CV.8.
1. Nozzle Cover Assembly – D223-02002. Simplicity Rubber Bumper – B220-25143. Simplicity Headlamp Lens – B018-0315C4. E Clip for Motor Shaft – A732-30005. Motor Support Base – B223-2814C6. Motor (S10CV, S10CV.2, S10CV.6, S10CV.8) or Motor (S10CV.4) – C223-2110/C223-21007. Motor Housing – B223-01148. Screw M5 X 6mm Socket – A733-50009. Pivot Bushing – B220-44149. Pivot Bushing – B220-441410. Felt Pivot Seal – B220-450011. Scroll Housing Right – B220-401412. Washer Under Fan – A733-330013. Motor Fan – B220-431414. Fan Washer – A733-220015. Handle Bolt Nut – A432-060516. Scroll Housing Left – B220-411417. Screw, #8-18 x 5/8 in. – A732-831417. Screw, #8-18 x 5/8 in. – A732-831417. Screw, #8-18 x 5/8 in. – A732-831418. Motor Inlet Seal – B480-451419. Motor Assembly – D223-210020. Inlet Duct Cover – B220-021421. Basetray Assembly – D220-011422. Basetray Plug – B016-191423. Upright Stop Spring – B220-090024. Axle Clamp – 54.13625. Upright Stop Pedal Assembly – D220-071426. Upright Stop Pedal – B220-071427. Upright Stop Pedal Pivot – B220-080028. Hole Plug – A018-141429. LED PC Board (S10CV, S10CV.2) or LED PC Board Commercial (S10CV.4, S10CV.6, S10CV.8) – B317-1100K/B317-1150K30. Large Wheel Axle – B010-2800C31. Rear Wheel – C220-0531C32. Base Tray Wheel Axle – B010-0001E33. Front Wheel with Bushing and Axle – D010-263134. Baseplate Assembly – D220-041436. Squeegee – B015-3000B37. Baseplate Screw – B220-041438. Base Plate Axle – B370-1700B39. Base Plate Wheel – B370-184340. Flat Brushroll Belt or Flat Belt 2-Pack – B014-0814B/ULW-B241. Wood Agitator Brushroll for Cordless Ultralite Vacuums (S10CV, S10CV.2) or Steel Agitator Assembly White Brushes (S10CV.4, S10CV.6, S10CV.8) – D223-1700/D012-230042. Combination Screw M4 x 12 – A732-250043. Strain Relief Washer – B034-0100Cordless Handle and Main Body Parts (S10CV, S10CV.2)
This diagram covers the cordless handle and main body of the Simplicity S10CV and S10CV.2.
Riccar fit: 23 of the 26 parts in this section also fit the Riccar SupraLite R10CV and R10CV.2.
1. Handle Grip Assembly – C223-01142. Screw, #8-18 x 5/8 in. – A732-83142. Screw, #8-18 x 5/8 in. – A732-83142. Screw, #8-18 x 5/8 in. – A732-83142. Screw, #8-18 x 5/8 in. – A732-83143. ON/OFF Switch – A328-15004. Handle Battery Wire Harness – B223-1500B5. Handle Tube – B220-34006. Handle Back Cover – B220-31147. Screw #10-32 x 1-5/8 – A432-07057. Screw #10-32 x 1-5/8 – A432-07058. Carry Handle – B223-03149. Washer – A733-510010. Neck Coupling Back – B223-421411. Battery Post – B223-130012. Cable Cover – B223-431413. Neck Coupling Front Black – C220-101414. Hex Lock Nut – 3035814. Hex Lock Nut – 3035815. Handle Duct – B220-3014C16. Battery – C223-1800C-T17. Battery Clamp – B223-081421. Charger – C223-2000B22. Bag Mount Seal – B220-390023. Bag Mount Assembly – D484-228224. Simplicity Hard Shell Bag – D220-540025. Type L HEPA Media Bag (Single) or Charcoal-Lined HEPA Media Bag (Single) or Simplicity Type L HEPA Media Bags (6-Pack) or Simplicity Charcoal-Lined Type L HEPA Media Bags (6-Pack) – B220-5382C/B220-5382D/SLH-6/SLHC-625. Type L HEPA Media Bag (Single) or Charcoal-Lined HEPA Media Bag (Single) or Simplicity Type L HEPA Media Bags (6-Pack) or Simplicity Charcoal-Lined Type L HEPA Media Bags (6-Pack) – B220-5382C/B220-5382D/SLH-6/SLHC-626. Polyurethane Handle Spacer – B388-590028. Charger – C223-2000BCordless Handle and Main Body Parts (S10CV.4, S10CV.6, S10CV.8)
This diagram covers the cordless handle and main body of the Simplicity S10CV.4, S10CV.6 and S10CV.8.
Riccar fit: 26 of the 29 parts in this section also fit the Riccar SupraLite R10CV.4, R10CV.6 and R10CV.8.
1. Handle Grip Assembly – C223-01142. Screw, #8-18 x 5/8 in. – A732-83142. Screw, #8-18 x 5/8 in. – A732-83142. Screw, #8-18 x 5/8 in. – A732-83142. Screw, #8-18 x 5/8 in. – A732-83143. ON/OFF Switch – A328-15004. Cordless ULW Harness Kit – D223-60005. Handle Tube – B220-34006. Handle Back Cover – B220-31147. Screw #10-32 x 1-5/8 – A432-07057. Screw #10-32 x 1-5/8 – A432-07058. Carry Handle – B223-03149. Washer – A733-510010. Neck Coupling Back – B223-421411. Battery Post – B223-130012. Cable Cover – B223-431413. Neck Coupling Front Black – C220-101414. Hex Lock Nut – 3035814. Hex Lock Nut – 3035815. Handle Duct – B220-3014C16. Battery – C223-1800C-T17. Battery Clamp – B223-081418. Latch Case – B223-401419. Latch Button – B223-419720. Latch Spring – A224-060021. Charger – C223-2000B22. Bag Mount Seal – B220-390023. Bag Mount Assembly – D484-228224. Simplicity Hard Shell Bag – D220-540025. Type L HEPA Media Bag (Single) or Charcoal-Lined HEPA Media Bag (Single) or Simplicity Type L HEPA Media Bags (6-Pack) or Simplicity Charcoal-Lined Type L HEPA Media Bags (6-Pack) – B220-5382C/B220-5382D/SLH-6/SLHC-625. Type L HEPA Media Bag (Single) or Charcoal-Lined HEPA Media Bag (Single) or Simplicity Type L HEPA Media Bags (6-Pack) or Simplicity Charcoal-Lined Type L HEPA Media Bags (6-Pack) – B220-5382C/B220-5382D/SLH-6/SLHC-625. Type L HEPA Media Bag (Single) or Charcoal-Lined HEPA Media Bag (Single) or Simplicity Type L HEPA Media Bags (6-Pack) or Simplicity Charcoal-Lined Type L HEPA Media Bags (6-Pack) – B220-5382C/B220-5382D/SLH-6/SLHC-626. Polyurethane Handle Spacer – B388-590028. Charger – C223-2000BSteel Agitator Parts (S10CV.4, S10CV.6, S10CV.8)
This diagram covers the steel agitator of the Simplicity S10CV.4, S10CV.6 and S10CV.8. The S10CV.4, S10CV.6 and S10CV.8 use a steel agitator; the earlier S10CV and S10CV.2 use the agitator shown in the cordless nozzle section above.
Riccar fit: 12 of the 12 parts in this section also fit the Riccar SupraLite R10CV.4, R10CV.6 and R10CV.8.
1. Locking Hex Nut 1/4-28 – A375-01001. Locking Hex Nut 1/4-28 – A375-01002. Metal End Cap – B013-16002. Metal End Cap – B013-16003. Screw Pulley End 80mm – A733-18104. Retainer Ring – B475-19004. Retainer Ring – B475-19005. Felt Seal – B375-39005. Felt Seal – B375-39006. Bearing – A375-02006. Bearing – A375-02007. Pulley Clamping Design for Flat Belt – B220-12008. Short Brush Strip B013-1000 – B013-0301B8. Short Brush Strip B013-1000 – B013-0301B9. Long Brush Strip B475-0400B – B013-0401B9. Long Brush Strip B475-0400B – B013-0401B10. Agitator Bearing Holder with Edge Brushes – B013-150011. Screw Non-Pulley End 40mm – A733-180012. Steel Agitator Assembly White Brushes – D012-2300| # | Image | Part Description | Part Number | Price |
|---|---|---|---|---|
| 1 | ![]() | Locking Hex Nut 1/4-28 | A375-0100 | $4.99 |
| 2 | ![]() | Metal End Cap | B013-1600 | $7.99 |
| 3 | ![]() | Screw Pulley End 80mm | A733-1810 | $2.99 |
| 4 | ![]() | Retainer Ring | B475-1900 | $2.99 |
| 5 | ![]() | Felt Seal | B375-3900 | $2.99 |
| 6 | ![]() | Bearing | A375-0200 | $4.99 |
| 7 | ![]() | Pulley Clamping Design for Flat Belt | B220-1200 | $4.99 |
| 8 | ![]() | Short Brush Strip B013-1000 | B013-0301B | $4.99 |
| 9 | ![]() | Long Brush Strip B475-0400B | B013-0401B | $4.99 |
| 10 | ![]() | Agitator Bearing Holder with Edge Brushes | B013-1500 | $10.99 |
| 11 | ![]() | Screw Non-Pulley End 40mm | A733-1800 | $5.98 |
| 12 | ![]() | Steel Agitator Assembly White Brushes | D012-2300 | $82.99 |
Simplicity S10 Parts and Service
Twin City Vacuum in Crystal, Minnesota has sold and serviced vacuums since 1956, and every Simplicity S10 part on this page is a genuine factory part shipped from our store at 5415 West Broadway. If the part you need is not linked, or you are not sure which version your S10 takes, call us at 763-535-0770 with the model number from the label and we will match it. Our repair shop can also install parts for you. Browse every Simplicity S10 part in the Simplicity S10 parts category, the Simplicity parts index, or find owner manuals at simplicityvac.com.
Frequently Asked Questions
Do Simplicity S10 parts fit the Riccar R10 SupraLite?
Mostly, yes. Riccar builds the same ultra-lightweight uprights as the Riccar SupraLite R10 family (R10S, R10D, R10P, R10SAND, R10E and R10CV models), and most parts are the same part number on both brands. Each section above shows how many of its parts also fit the matching Riccar models, and every part page lists the full set of Simplicity and Riccar models it fits.
How do I tell which Simplicity S10 model I have?
Look for the model number on the label on the back of the vacuum. The S10S, S10D, S10P and S10SAND are corded uprights with a hard-shell bag housing, the S10E has a cloth outer bag, and the S10CV, S10CV.2, S10CV.4, S10CV.6 and S10CV.8 are cordless. Where a part differs between models, the parts table shows both part numbers and the model each one fits.
What bags does the Simplicity S10 use?
The corded S10S, S10D, S10P and S10SAND and the cordless S10CV models use Type L HEPA media bags or the plastic-collar paper bag, and the S10E uses Type F bags. Find them, along with belts and brush strips, in the Simplicity S10 accessories, or call 763-535-0770 if you are not sure.
Can Twin City Vacuum install Simplicity S10 parts for me?
Yes. Bring your Simplicity S10 to our repair shop at 5415 West Broadway, Crystal, MN 55428, or call 763-535-0770. We have serviced vacuums since 1956 and can order and install any part on this page.
Looking for another model? See all Simplicity vacuum parts diagrams.








































































































































































