Straight Shaft Motor Assembly D113-1500
$133.99
Genuine Tacony D113-1500 straight-shaft ULW motor assembly with fan for CleanMax Zoom ZM-200 and ZM-400, Riccar R10E, Simplicity F3300/F3300C/F3500/S10E and Fuller Brush uprights.
The D113-1500 straight shaft motor assembly is the genuine Ultra Light Weight (ULW) motor with fan for the Tacony commercial upright platform, the motor that drives both suction and the brushroll belt. It is a complete straight-shaft motor unit, and it is shared across the CleanMax, Riccar, Simplicity, and Fuller Brush ULW uprights that use this design.
Compatible Models for the D113-1500 Straight Shaft Motor Assembly
- CleanMax Zoom ZM-200
- CleanMax Zoom ZM-400
- Riccar R10E
- Simplicity F3300, F3300C, F3500, S10E
- Fuller Brush ULW uprights
The D113-1500 is a cross-brand ULW motor used on the CleanMax Zoom ZM-200 and ZM-400, the Riccar R10E, the Simplicity F3300, F3300C, F3500 and S10E, and the Fuller Brush ULW uprights. Because it is a shared motor and fitment matters on a high-value part, call us at 763-535-0770 with your model number and we will confirm it is the correct motor before you order.
What the D113-1500 Motor Assembly Does
The motor is the heart of the vacuum. Its armature spins the suction fan that creates airflow, and on this straight-shaft design the same motor shaft also drives the flat belt that turns the brushroll, so a single motor powers both cleaning actions. Because it does two jobs and runs for hours on a commercial route, the motor is the part whose wear eventually determines the life of the machine, and Tacony supplies it as a complete assembly so a worn motor can be replaced as one balanced unit rather than rebuilt.
Signs You Need a New Motor Assembly
Replace the D113-1500 when the motor is loud, grinding, or screeching from worn bearings, when it smells hot or throws sparks and shuts off, when suction has fallen off even with a clear airway and fresh bag, or when the motor will not start at all. Carbon-brush and bearing wear are normal at the end of a commercial motor’s life, and once the bearings are gone a full assembly is the reliable fix rather than a partial repair.
Installation and Fit
Replacing the motor means opening the lower housing, transferring the electrical connections, and seating the new assembly with its fan and belt drive aligned. Because it carries line voltage it is a job best done by someone comfortable with vacuum wiring or by a service shop; our technicians can install it for you. Our technicians at 5415 West Broadway, Crystal, MN 55428 have been servicing CleanMax equipment since 1956. Browse more CleanMax Zoom handle and bag parts, or learn more at CleanMax.
Frequently Asked Questions
What does the D113-1500 motor assembly do?
It is the ULW motor with fan that powers the vacuum: its shaft spins the suction fan and, on this straight-shaft design, also drives the brushroll belt, so one motor runs both suction and the brush.
How do I know if my D113-1500 needs replacing?
Replace it if the motor is loud, grinding, or screeching, smells hot or sparks and cuts out, has lost suction despite a clear airway and fresh bag, or will not start at all.
What models is the D113-1500 motor assembly compatible with?
It fits the CleanMax Zoom ZM-200 and ZM-400, Riccar R10E, Simplicity F3300, F3300C, F3500 and S10E, and Fuller Brush ULW uprights. Call 763-535-0770 to confirm your model before ordering this high-value part.
How do I order the D113-1500 motor assembly or get help?
You can add the D113-1500 motor assembly directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax, Riccar and Simplicity equipment since 1956 and can help confirm the right motor for your machine.
