Bearing 6207 61413501
$51.99
Genuine OEM 6207 ball bearing (part# 61413501) for Tornado stand-on floor scrubbers. It is the large bearing in the steering column assembly that carries the column and lets it turn smoothly under the operator’s weight.
Genuine OEM 6207 single-row deep-groove ball bearing (part# 61413501) for Tornado stand-on floor scrubbers — the machines it fits are listed below. It is the largest bearing in the steering group, carrying the steering column where the loads are highest.
6207 is a standard metric size — 35 mm bore, 72 mm outside diameter, 17 mm wide — but the size is only half the story. This bearing sits in the steering column of a machine where an operator leans on the wheel all shift, steps on and off using it as a handhold, and steers while the machine is loaded. It takes radial load from steering effort and a significant thrust component from the operator’s weight, in a damp environment.
A failing column bearing announces itself through the wheel. You feel notchiness or roughness as the wheel is turned slowly, hear a rumble or growl that changes with steering rather than speed, notice that the wheel no longer returns smoothly, or find play when the wheel is pushed and pulled along the column axis. Steering that is heavy in one direction and light in the other also points here.
Replace it as a set with the other column bearings where practical. They age together, and the labour to get to one is most of the labour to get to both. Clean the housing and the shaft seat before fitting, check both for wear or ovalling, and press the new bearing on the correct race — pressing through the balls is how a new bearing is ruined before the machine moves. Check the seals and any shim or spacer arrangement while you are in there.
This is the genuine Tornado part, so the bearing, its fit and its sealing match what the steering column was designed around.
Compatible Models
- Tornado BD 26/27 — 99772
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 3 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the 6207 bearing (part# 61413501) do on a Tornado stand-on scrubber?
It is the large bearing carrying the steering column, taking the radial load from steering effort and the thrust load from an operator leaning on the wheel, while letting the column turn smoothly.
How do I know if the bearing (part# 61413501) needs replacing?
You feel it through the wheel: notchiness or roughness turning slowly, a rumble or growl that changes with steering rather than road speed, a wheel that no longer returns smoothly, play along the column axis, or steering that is heavy one way and light the other.
Should I replace the other column bearings at the same time?
Where practical, yes. They age together and the labour to reach one is most of the labour to reach both. Clean and inspect the housing and shaft seats before fitting, and press on the correct race — pressing through the balls ruins a new bearing before the machine moves.
How do I order the Bearing 6207 (part# 61413501) or get help?
You can add the Bearing 6207 (part# 61413501) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the bearing 6207 (part# 61413501) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet