Tornado Belt Cover 19819

The Belt Cover (part# 19819) is a genuine Tornado OEM replacement part fitted across 4 Tornado wide-area upright models — see the full compatibility list below. It closes off the belt and pulley so the drive is guarded and debris is kept out of it.

On this machine the belt cover is part of the assembly shown on the model’s parts diagrams. One per machine; check the belt and pulleys while the cover is off.

When to replace it. Replace the belt cover when the cover is cracked, a fixing lug has broken away, or it no longer clips down over the belt. Fitting a worn part back during a service is usually a false economy on a machine in daily commercial use, because the failure tends to return quickly and can take neighbouring components with it.

Fitting notes. One per machine; check the belt and pulleys while the cover is off. Always match electrical parts to your machine’s voltage, and check the serial plate before ordering parts for the later production build. If you are not certain which part you need, give us the callout number from the relevant diagram and we will confirm it against your serial number before you order.

Compatible Models for the Belt Cover

• Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V
• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series D
• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series E
• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series F

Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956. You can browse the full machine on the Tornado 93031 Carpetkeeper parts page, see every model we stock parts for on our Tornado cleaning equipment parts page, and read the manufacturer’s own product information at tornadovac.com.

Frequently Asked Questions

What does the Belt Cover do on the Tornado 93031 Carpetkeeper?

The belt cover closes off the belt and pulley so the drive is guarded and debris is kept out of it.

How do I know if my Belt Cover needs replacing?

Replace it when the cover is cracked, a fixing lug has broken away, or it no longer clips down over the belt.

What models is the Belt Cover (part# 19819) compatible with?

It fits 4 Tornado wide-area upright models: 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V; 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series D; 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series E; 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series F.

How do I order the Belt Cover (part# 19819) or get help?

You can add the Belt Cover (part# 19819) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing commercial floor-care equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.