Bent Fitting 62340271
$12.99
Genuine OEM bent fitting (part# 62340271) for Tornado floor scrubbers. It is the elbow that turns the solution line where a straight run will not fit.
Genuine OEM bent fitting (part# 62340271) for Tornado floor scrubbers — compatible machines are listed below. On the solution tank assembly it is the elbow that turns a line through an angle where a straight fitting and a bent hose would not work.
Using a fitting to make the turn instead of bending the hose matters more than it looks. A hose forced around a tight radius kinks, and a kinked hose is a restriction that no one can see — it reduces flow at every control setting and will eventually crack where it is folded. An elbow turns the line in a controlled way with a known internal radius, so the flow loss is designed in rather than accidental.
That is also why substituting a different elbow is a bad idea even when the threads match. A fitting with a tighter internal bend or a smaller bore changes the restriction, and the machine quietly lays down less solution than it should with nothing visibly wrong.
Elbows in a scrubber’s solution circuit fail the way other plastic fittings do, with one extra factor: the bend concentrates stress, so a crack usually starts at the outside of the turn or at the thread root. The leverage of a hose being pulled off, or of someone using the fitting as a handle, is the usual cause. Those cracks often only weep under flow, and on the solution side a weep means air drawn into the line — giving flow that varies run to run and defies diagnosis at the pump.
Inspect it whenever this plumbing is opened: look along the outside of the bend and at the thread root, check the barb ridges are sharp, and replace any fitting that has been over-tightened.
Compatible Models
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 6 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the bent fitting (part# 62340271) do?
It turns the solution line through an angle on the tank assembly, in a controlled way with a known internal radius, where bending the hose instead would kink it.
Why not just bend the hose around the corner?
A hose forced around a tight radius kinks, and a kink is an invisible restriction — it cuts flow at every control setting and eventually cracks the hose where it is folded.
Where do these fittings crack?
At the outside of the bend or at the thread root, where the turn concentrates stress. The usual cause is leverage from a hose being pulled off. Those cracks often only weep under flow, which draws air into the solution line and makes flow inconsistent.
How do I order the Bent Fitting (part# 62340271) or get help?
You can add the Bent Fitting (part# 62340271) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the bent fitting (part# 62340271) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet