Tornado Bolt #8-32 x 3/4 in. X8821
$2.99
Genuine OEM #8-32 x 3/4 in. bolt (part# X8821) for commercial high-speed burnishers — used with the X8822 spacer on the Tornado Brute Force 1600 (98458B) and Brute Force 2000 (98482B).
The X8821 is a #8-32 bolt, 3/4 inch long. It appears on the Brute Force 1600 (98458B) main assembly drawing and on the Brute Force 2000 (98482B) drawing, listed immediately next to the spacer (X8822) on both. Neither 98486 drawing lists it, so this listing names the two machines it fits. It is a shared part used across Tornado machines — see the full list of models below.
A bolt paired with a spacer at consecutive callouts is a standoff joint: the spacer sets a fixed gap and the bolt clamps through it. That arrangement is used where two parts must be held a precise distance apart rather than drawn tight together, which means the length of the bolt and the length of the spacer are matched to each other. Substituting either one changes the geometry of the joint.
Replace the X8821 if the threads are galled, if the head is damaged, or if it has corroded. A standoff bolt that is tightened without its spacer, or with a crushed one, will pull the two parts together and distort them — so if you find one that has been over-tightened, check the parts either side of the spacer for deformation before you simply fit a new bolt.
This is one of the #8-32 fasteners the drawings use in three different lengths (1/2 inch X8272, 3/4 inch X8821 and 1 inch PX73), so check the callout rather than matching by eye. Order the spacer with it if the spacer is crushed or corroded. The part carries no model name because it is shared between the two non-dust-control Brute Force machines. Call 763-535-0770 with your model and serial number for confirmation.
Compatible Models
- Tornado models:
- P Series 17″ Floor Machine With Pad Holders (115V) — 97562
- 17″ — 97562B
- P Series 17″ Floor Machine With Pad Holders (230V) — 97563
- P Series 20″ Floor Machine With Pad Holders (115V) — 97564
- 20″ — 97564B
- P Series 20″ Floor Machine With Pad Holders (230V) — 97565
- P Series 1600 Glazer (115V) — 98458
- Brute Force 1600 — 98458B
- P Series 1600 Glazer (230V) — 98459
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- P Series 2000 Glazer (230V) — 98487
Frequently asked questions
Where is the #8-32 x 3/4 in. bolt (part# X8821) used on a Brute Force burnisher?
It appears on the Brute Force 1600 (98458B) drawing and on the Brute Force 2000 (98482B) drawing, next to the X8822 spacer.
Why is the X8821 listed next to a spacer?
Because it forms a standoff joint: the spacer sets a fixed gap and the bolt clamps through it. The bolt length and spacer length are matched, so neither should be substituted on its own.
How do I know if my X8821 bolt needs replacing?
Replace it if the threads are galled, the head is damaged, or it has corroded. If it has been tightened without its spacer, also check the parts either side for distortion.
What models is the #8-32 x 3/4 in. bolt (part# X8821) compatible with?
The Tornado Brute Force 1600 (98458B) and the Brute Force 2000 High-Speed Glazer (98482B).
How do I order the bolt (part# X8821) or get help?
You can add the bolt (part# X8821) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet