Brass Adjuster Nut 62370011

$3.88

Genuine OEM brass adjuster nut (part# 62370011) for Tornado floor scrubbers. It locks the solution flow adjustment so the setting stays where it is put.

Genuine OEM brass adjuster nut (part# 62370011) for Tornado floor scrubbers — the machines it fits are listed below. In the water valve assembly it locks an adjustment in place.

Adjusters that do not stay put are worse than no adjustment at all. The solution setting is made once and then has to survive a machine that vibrates continuously, and this nut is what holds it. When it loses its grip, the setting drifts during a shift: the machine starts the run laying down the right amount of water and ends it laying down too much or too little. Operators report that as the machine being inconsistent, nobody can reproduce it standing still, and the adjustment gets blamed.

Brass is specified rather than steel for a reason. It sits in a wet, chemically active joint, often against other brass fittings, where a plated steel nut would corrode and seize — and a seized lock nut means the adjustment cannot be changed at all without damaging the thread it is locking. Brass is also softer, so it conforms slightly as it tightens, which is part of how it holds.

That softness is the thing to respect when fitting. Brass threads strip easily and a brass hex rounds off under a poorly fitting wrench, so use the right size and tighten firmly rather than hard. Do not use thread adhesive to rescue a nut that will not hold — check the thread it runs on first.

Replace it when the hex is rounded, the thread drags or has been stripped, or it no longer holds the adjustment after being tightened properly.

Compatible Models

  • Tornado 20″ BD 20/11 — 99680
  • Tornado TS350-W20-U — 99694
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado 99694 — TS350-W20-U

This part is shared across 9 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the water valve drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the brass adjuster nut (part# 62370011) do?

It locks the solution flow adjustment in the water valve assembly so the setting survives the machine’s constant vibration.

My machine’s solution output drifts during a shift. Could this be it?

Yes. When this nut loses its grip, the setting moves as the machine vibrates — right at the start of the run, wrong by the end. It gets reported as the machine being inconsistent, and nobody can reproduce it standing still.

Why brass instead of steel?

It sits in a wet, chemically active joint, often against other brass fittings. A plated steel nut would corrode and seize, and a seized lock nut means the adjustment cannot be changed without damaging the thread it locks. Brass is softer, so tighten firmly rather than hard — the hex rounds off easily.

How do I order the Brass Adjuster Nut (part# 62370011) or get help?

You can add the Brass Adjuster Nut (part# 62370011) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the brass adjuster nut (part# 62370011) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Brass Adjuster Nut 62370011”

Your email address will not be published. Required fields are marked *