Brush Roll, Black Soft Bristle K69066410

The Brush Roll, Black Soft Bristle (part# K69066410) is the genuine Tacony OEM roller-bar agitator fitted with the softer black bristle set, sized for the 12-inch brush head on Tornado and CleanMax single-motor commercial uprights. This part fits three machines across two Tacony brands — the Tornado CVD 30 and CV 30 and the CleanMax CMP-5T Champ. The roller spins inside the nozzle and its angled bristle rows sweep embedded grit up out of the carpet pile and into the airflow; the soft black bristle is the standard-duty option, gentle enough for finer commercial carpet and low-pile without over-scrubbing the fibers.

Compatible Models for the Brush Roll

• Tornado CVD 30 12″ Single-Motor Upright — Model 91430
• Tornado CV 30 12″ Single-Motor Upright — Model 91449
• CleanMax CMP-5T Champ

You will usually feel the brush roll going before you see it — the machine stops grooming the carpet into clean rows, surface lint and grit get left behind, or the motor spins up while the roller barely turns because the belt is slipping on a worn bar. Pull it and look for bristles that are frayed, splayed, or worn noticeably shorter than the rows around them, hair and carpet fiber wound tight at the end caps, or a bar that has warped enough to thump as it rotates. Because the soft bristle abrades faster than the stiffer red set, high-traffic accounts tend to cycle through these on a regular schedule.

Swapping it is a quick job on these machines: the brush-head cover comes off, the old roller lifts out of its end bearings, and the new one drops in — keep the drive belt seated on the pulley end as you seat it. If your floors are mostly dense, heavily trafficked commercial carpet and you want more aggressive agitation, the same brush head also accepts the Red Hard Bristle Brush Roll (K69066420) as the stiffer alternative — same fit, firmer bristle.

Twin City Vacuum has been selling and servicing Tacony floor-care equipment since 1956, and we stock genuine Tacony parts so the roller is correctly sized and balanced for the brush head. Find more parts on our Tornado CVD 30 parts and CleanMax CMP-5T parts pages.

Frequently Asked Questions

What does the Black Soft Bristle Brush Roll do on these machines?

The Brush Roll (part# K69066410) is the powered agitator inside the vacuum’s nozzle. As it spins it beats and sweeps the carpet with its soft black bristles, loosening embedded soil so the suction can lift it away; the softer bristle grooms finer and low-pile commercial carpet without over-scrubbing the fibers.

How do I know if my K69066410 brush roll needs replacing?

Replace it when the bristles are frayed, flattened, or worn shorter than the rows beside them, when hair and thread are wound solid at the end caps, or when the machine leaves grit and lint behind and no longer grooms clean rows. A warped bar that thumps as it turns is also past its service life.

What models is the Brush Roll, Black Soft Bristle (part# K69066410) compatible with?

It fits the Tornado CVD 30 12″ (Model 91430) and Tornado CV 30 12″ (Model 91449) single-motor uprights and the CleanMax CMP-5T Champ — one genuine Tacony roller shared across all three.

How do I order the Brush Roll, Black Soft Bristle (part# K69066410) or get help?

You can add the Brush Roll, Black Soft Bristle (part# K69066410) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony floor-care equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.