Bumper 62405002
$12.99
Genuine OEM vibration-damping bumper (part# 62405002) for Tornado floor scrubbers. It is the rubber buffer on the frame that cushions a panel or moving assembly against its stop.
Genuine OEM bumper (part# 62405002), a vibration-damping rubber buffer, for Tornado floor scrubbers — the machine list is below. It is fitted to the frame where a panel, cover or moving assembly comes to rest, and it does two jobs: it stops metal landing on metal, and it damps the vibration that would otherwise be transmitted through that contact.
Bumpers are the quiet parts whose absence is loud. When one is missing or has gone hard, the first symptom is noise — a knock each time the machine crosses a joint, or a rattle that comes and goes with speed. Operators report it as “something loose at the back”. The second symptom costs money: with no buffer, the panel and the frame hammer each other, and the paint, then the metal, then the mounting holes wear.
Rubber bumpers fail by hardening, splitting and tearing off their mount. Press one with a thumbnail: a good bumper is compliant and springs back; a dead one is hard and leaves no mark. Replace any that are cracked, compressed flat, missing a chunk, or no longer gripping their mounting hole.
Fit them in sets where a machine uses several at the same location. One new bumper beside three hardened ones takes all the load and tears off quickly, and the noise does not go away, which usually gets the new part blamed. While replacing, check the mating face for the bright witness mark that shows where contact has been happening, and make sure the panel sits down evenly on all its buffers afterwards.
This is the genuine Tornado part in the correct size and compound, so the panel seats at the designed height and the damping is what the machine was built with.
Compatible Models
- Tornado BD 26/27 — 99770
- Tornado BR 28/27 — 99775
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 4 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the frame drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the bumper (part# 62405002) do on a Tornado floor scrubber?
It is a rubber buffer on the frame where a panel, cover or moving assembly comes to rest. It stops metal landing on metal and damps the vibration that contact would otherwise transmit.
How do I know if the bumper (part# 62405002) needs replacing?
Press it with a thumbnail — a good one is compliant and springs back, a dead one is hard and leaves no mark. Replace any that are cracked, compressed flat, missing a chunk, or no longer gripping their mounting hole.
Should I replace them in sets?
Yes, where several are used at the same location. One new bumper beside three hardened ones takes all the load and tears off quickly, and the knocking noise does not go away — which usually gets the new part blamed.
How do I order the Bumper (part# 62405002) or get help?
You can add the Bumper (part# 62405002) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the bumper (part# 62405002) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet