Tornado Burnisher Bumper X8030K
$2.99
Genuine OEM bumper (part# X8030K) for commercial high-speed burnishers — the rubber bumper that protects the machine and the building where the body makes contact. Fits the Tornado Brute Force 1600 (98458B) and Brute Force 2000 (98482B).
The X8030K is a bumper fitted to the body of the Brute Force 1600 (98458B) and the Brute Force 2000 (98482B). It is on both machines’ main assembly drawings. Neither of the Brute Force 2000 Dust Control (98486) drawings lists it — that machine’s shroud and housing arrangement uses different protection — so this listing names the two machines it fits. It is a shared part used across Tornado machines — see the full list of models below.
A bumper on a 20 inch burnisher is a building-protection part as much as a machine-protection part. These machines are heavy and are worked right up to walls, baseboards, door frames and fixtures, and the operator cannot see the far side of the deck. The bumper is what stops the machine marking a painted wall or chipping a baseboard, and what absorbs contact so the housing behind it does not crack.
Replace the X8030K if it is torn, missing, hardened, flattened on one side, or worn through to its mounting. A bumper that has gone hard with age transmits impacts straight into the housing instead of absorbing them, so an old bumper offers almost no protection even when it looks complete. Any missing bumper should be treated as urgent on a machine working in a finished building — the cost of one bumper is a fraction of the cost of repainting a corridor.
Check the bumper whenever the machine is serviced and fit a complete set rather than one: a machine with one new bumper and three dead ones will still mark walls on the sides that are not protected. This part is shared between the two non-dust-control Brute Force machines and carries no model name. Call 763-535-0770 if you want the bumper set listed for your machine.
Compatible Models
- Tornado models:
- P Series 17″ Floor Machine With Pad Holders (115V) — 97562
- P Series 17″ Floor Machine With Pad Holders (230V) — 97563
- P Series 20″ Floor Machine With Pad Holders (115V) — 97564
- P Series 20″ Floor Machine With Pad Holders (230V) — 97565
- Brute Force 1600 — 98458B
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
Frequently asked questions
What does the bumper (part# X8030K) do on a burnisher?
It absorbs contact where the machine body meets walls, baseboards, door frames and fixtures, protecting both the building and the housing behind it.
How do I know if my X8030K bumper needs replacing?
Replace it if it is torn, missing, flattened, worn through, or hardened with age. A hardened bumper passes impacts straight into the housing and protects nothing.
Does the X8030K bumper fit the 98486 dust control glazer?
No. It appears only on the 98458B and 98482B drawings. The 98486 uses a different arrangement around its dust-control shroud.
What models is the bumper (part# X8030K) compatible with?
The Tornado Brute Force 1600 (98458B) and the Brute Force 2000 High-Speed Glazer (98482B).
How do I order the bumper (part# X8030K) or get help?
You can add the bumper (part# X8030K) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet